OSPF Configuration Example
This section shows an OSPF configuration example based on the reference topology.
The example configuration configures:
- OSPFv2 unnumbered on all leafs and spines
- MLAG on leaf01 and leaf02, and on border01 and border02
- leaf01, leaf02, spine01, and spine02 in area 0
- border01 and border02 (ABRs) in area 0 and area 1
cumulus@leaf01:~$ nv set interface lo ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface swp51 ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface swp52 ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface bond1 bond member swp1
cumulus@leaf01:~$ nv set interface bond2 bond member swp2
cumulus@leaf01:~$ nv set interface bond3 bond member swp3
cumulus@leaf01:~$ nv set interface bond1 bond mlag id 1
cumulus@leaf01:~$ nv set interface bond2 bond mlag id 2
cumulus@leaf01:~$ nv set interface bond3 bond mlag id 3
cumulus@leaf01:~$ nv set interface bond1 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond2 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond3 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond1-3 bridge domain br_default
cumulus@leaf01:~$ nv set interface peerlink bond member swp49-50
cumulus@leaf01:~$ nv set mlag mac-address 44:38:39:FF:00:AA
cumulus@leaf01:~$ nv set mlag backup 10.10.10.2
cumulus@leaf01:~$ nv set mlag peer-ip linklocal
cumulus@leaf01:~$ nv set interface vlan10 ip address 10.1.10.2/24
cumulus@leaf01:~$ nv set interface vlan20 ip address 10.1.20.2/24
cumulus@leaf01:~$ nv set interface vlan30 ip address 10.1.30.2/24
cumulus@leaf01:~$ nv set interface vlan10 ip vrr address 10.1.10.1/24
cumulus@leaf01:~$ nv set interface vlan10 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan10 ip vrr state up
cumulus@leaf01:~$ nv set interface vlan20 ip vrr address 10.1.20.1/24
cumulus@leaf01:~$ nv set interface vlan20 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan20 ip vrr state up
cumulus@leaf01:~$ nv set interface vlan30 ip vrr address 10.1.30.1/24
cumulus@leaf01:~$ nv set interface vlan30 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan30 ip vrr state up
cumulus@leaf01:~$ nv set bridge domain br_default vlan 10,20,30
cumulus@leaf01:~$ nv set bridge domain br_default untagged 1
cumulus@leaf01:~$ nv set interface bond1 bridge domain br_default access 10
cumulus@leaf01:~$ nv set interface bond2 bridge domain br_default access 20
cumulus@leaf01:~$ nv set interface bond3 bridge domain br_default access 30
cumulus@leaf01:~$ nv set vrf default router ospf router-id 10.10.10.1
cumulus@leaf01:~$ nv set interface lo router ospf area 0
cumulus@leaf01:~$ nv set interface swp51 router ospf area 0
cumulus@leaf01:~$ nv set interface swp52 router ospf area 0
cumulus@leaf01:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@leaf01:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@leaf01:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@leaf01:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@leaf01:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@leaf01:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@leaf01:~$ nv set interface vlan10 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan20 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan30 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan10 router ospf passive on
cumulus@leaf01:~$ nv set interface vlan20 router ospf passive on
cumulus@leaf01:~$ nv set interface vlan30 router ospf passive on
cumulus@leaf01:~$ nv set router ospf timers spf delay 80
cumulus@leaf01:~$ nv set router ospf timers spf holdtime 100
cumulus@leaf01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@leaf01:~$ nv config apply
cumulus@leaf02:~$ nv set interface lo ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface swp51 ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface swp52 ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface bond1 bond member swp1
cumulus@leaf02:~$ nv set interface bond2 bond member swp2
cumulus@leaf02:~$ nv set interface bond3 bond member swp3
cumulus@leaf02:~$ nv set interface bond1 bond mlag id 1
cumulus@leaf02:~$ nv set interface bond2 bond mlag id 2
cumulus@leaf02:~$ nv set interface bond3 bond mlag id 3
cumulus@leaf02:~$ nv set interface bond1 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond2 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond3 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond1-3 bridge domain br_default
cumulus@leaf02:~$ nv set interface peerlink bond member swp49-50
cumulus@leaf02:~$ nv set mlag mac-address 44:38:39:FF:00:AA
cumulus@leaf02:~$ nv set mlag backup 10.10.10.1
cumulus@leaf02:~$ nv set mlag peer-ip linklocal
cumulus@leaf02:~$ nv set interface vlan10 ip address 10.1.10.3/24
cumulus@leaf02:~$ nv set interface vlan20 ip address 10.1.20.3/24
cumulus@leaf02:~$ nv set interface vlan30 ip address 10.1.30.3/24
cumulus@leaf02:~$ nv set interface vlan10 ip vrr address 10.1.10.1/24
cumulus@leaf02:~$ nv set interface vlan10 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan10 ip vrr state up
cumulus@leaf02:~$ nv set interface vlan20 ip vrr address 10.1.20.1/24
cumulus@leaf02:~$ nv set interface vlan20 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan20 ip vrr state up
cumulus@leaf02:~$ nv set interface vlan30 ip vrr address 10.1.30.1/24
cumulus@leaf02:~$ nv set interface vlan30 ip vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan30 ip vrr state up
cumulus@leaf02:~$ nv set bridge domain br_default vlan 10,20,30
cumulus@leaf02:~$ nv set bridge domain br_default untagged 1
cumulus@leaf02:~$ nv set interface bond1 bridge domain br_default access 10
cumulus@leaf02:~$ nv set interface bond2 bridge domain br_default access 20
cumulus@leaf02:~$ nv set interface bond3 bridge domain br_default access 30
cumulus@leaf02:~$ nv set vrf default router ospf router-id 10.10.10.2
cumulus@leaf02:~$ nv set interface lo router ospf area 0
cumulus@leaf02:~$ nv set interface swp51 router ospf area 0
cumulus@leaf02:~$ nv set interface swp52 router ospf area 0
cumulus@leaf02:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@leaf02:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@leaf02:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@leaf02:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@leaf02:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@leaf02:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@leaf02:~$ nv set interface vlan10 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan20 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan30 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan10 router ospf passive on
cumulus@leaf02:~$ nv set interface vlan20 router ospf passive on
cumulus@leaf02:~$ nv set interface vlan30 router ospf passive on
cumulus@leaf02:~$ nv set router ospf timers spf delay 80
cumulus@leaf02:~$ nv set router ospf timers spf holdtime 100
cumulus@leaf02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@leaf02:~$ nv config apply
cumulus@spine01:~$ nv set interface lo ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp1 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp2 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp5 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp6 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set vrf default router ospf router-id 10.10.10.101
cumulus@spine01:~$ nv set interface lo router ospf area 0
cumulus@spine01:~$ nv set interface swp1 router ospf area 0
cumulus@spine01:~$ nv set interface swp1 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp1 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp1 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp2 router ospf area 0
cumulus@spine01:~$ nv set interface swp2 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp2 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp2 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp5 router ospf area 0
cumulus@spine01:~$ nv set interface swp5 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp5 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp5 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp6 router ospf area 0
cumulus@spine01:~$ nv set interface swp6 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp6 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp6 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine01:~$ nv set router ospf timers spf holdtime 100
cumulus@spine01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine01:~$ nv config apply
cumulus@spine02:~$ nv set interface lo ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp1 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp2 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp5 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp6 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set vrf default router ospf router-id 10.10.10.102
cumulus@spine02:~$ nv set interface lo router ospf area 0
cumulus@spine02:~$ nv set interface swp1 router ospf area 0
cumulus@spine02:~$ nv set interface swp1 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp1 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp1 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp2 router ospf area 0
cumulus@spine02:~$ nv set interface swp2 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp2 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp2 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp5 router ospf area 0
cumulus@spine02:~$ nv set interface swp5 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp5 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp5 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp6 router ospf area 0
cumulus@spine02:~$ nv set interface swp6 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp6 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp6 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine02:~$ nv set router ospf timers spf holdtime 100
cumulus@spine02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine02:~$ nv config apply
cumulus@border01:~$ nv set interface lo ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface swp51 ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface swp52 ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface bond1 bond member swp1
cumulus@border01:~$ nv set interface bond2 bond member swp2
cumulus@border01:~$ nv set interface bond1 bond mlag id 1
cumulus@border01:~$ nv set interface bond2 bond mlag id 2
cumulus@border01:~$ nv set interface bond1 bond lacp-bypass on
cumulus@border01:~$ nv set interface bond2 bond lacp-bypass on
cumulus@border01:~$ nv set interface bond1 bridge domain br_default access 2001
cumulus@border01:~$ nv set interface bond2 bridge domain br_default access 2001
cumulus@border01:~$ nv set interface bond1-2 bridge domain br_default
cumulus@border01:~$ nv set interface vlan2001
cumulus@border01:~$ nv set interface vlan2001 ip address 10.1.201.2/24
cumulus@border01:~$ nv set interface vlan2001 ip vrr address 10.1.201.1/24
cumulus@border01:~$ nv set interface vlan2001 ip vrr mac-address 00:00:5e:00:01:00
cumulus@border01:~$ nv set interface vlan2001 ip vrr state up
cumulus@border01:~$ nv set interface peerlink bond member swp49-50
cumulus@border01:~$ nv set mlag mac-address 44:38:39:FF:00:FF
cumulus@border01:~$ nv set mlag backup 10.10.10.64
cumulus@border01:~$ nv set mlag peer-ip linklocal
cumulus@border01:~$ nv set bridge domain br_default untagged 1
cumulus@border01:~$ nv set vrf default router ospf router-id 10.10.10.63
cumulus@border01:~$ nv set interface lo router ospf area 0
cumulus@border01:~$ nv set interface swp51 router ospf area 0
cumulus@border01:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@border01:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@border01:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@border01:~$ nv set interface swp52 router ospf area 0
cumulus@border01:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@border01:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@border01:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@border01:~$ nv set interface vlan2001 router ospf area 1
cumulus@border01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border01:~$ nv set router ospf timers spf holdtime 100
cumulus@border01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border01:~$ nv config apply
cumulus@border02:~$ nv set interface lo ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface swp51 ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface swp52 ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface bond1 bond member swp1
cumulus@border02:~$ nv set interface bond2 bond member swp2
cumulus@border02:~$ nv set interface bond1 bond mlag id 1
cumulus@border02:~$ nv set interface bond2 bond mlag id 2
cumulus@border02:~$ nv set interface bond1 bond lacp-bypass on
cumulus@border02:~$ nv set interface bond2 bond lacp-bypass on
cumulus@border02:~$ nv set interface bond1 bridge domain br_default access 2001
cumulus@border02:~$ nv set interface bond2 bridge domain br_default access 2001
cumulus@border02:~$ nv set interface bond1-2 bridge domain br_default
cumulus@border02:~$ nv set interface vlan2001
cumulus@border02:~$ nv set interface vlan2001 ip address 10.1.201.3/24
cumulus@border02:~$ nv set interface vlan2001 ip vrr address 10.1.201.1/24
cumulus@border02:~$ nv set interface vlan2001 ip vrr mac-address 00:00:5e:00:01:00
cumulus@border02:~$ nv set interface vlan2001 ip vrr state up
cumulus@border02:~$ nv set interface peerlink bond member swp49-50
cumulus@border02:~$ nv set mlag mac-address 44:38:39:FF:00:FF
cumulus@border02:~$ nv set mlag backup 10.10.10.63
cumulus@border02:~$ nv set mlag peer-ip linklocal
cumulus@border02:~$ nv set bridge domain br_default untagged 1
cumulus@border02:~$ nv set vrf default router ospf router-id 10.10.10.64
cumulus@border02:~$ nv set interface lo router ospf area 0
cumulus@border02:~$ nv set interface swp51 router ospf area 0
cumulus@border02:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@border02:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@border02:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@border02:~$ nv set interface swp52 router ospf area 0
cumulus@border02:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@border02:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@border02:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@border02:~$ nv set interface vlan2001 router ospf area 1
cumulus@border02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border02:~$ nv set router ospf timers spf holdtime 100
cumulus@border02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border02:~$ nv config apply
cumulus@leaf01:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
10,20,30: {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 10
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 20
type: bond
bond3:
bond:
lacp-bypass: on
member:
swp3: {}
mlag:
enable: on
id: 3
bridge:
domain:
br_default:
access: 30
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.1/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.1/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.1/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan10:
ip:
address:
10.1.10.2/24: {}
vrr:
address:
10.1.10.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 10
vlan20:
ip:
address:
10.1.20.2/24: {}
vrr:
address:
10.1.20.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 20
vlan30:
ip:
address:
10.1.30.2/24: {}
vrr:
address:
10.1.30.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 30
mlag:
backup:
10.10.10.2: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:AA
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
delay: 80
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$LVtX8JO1GJbiiVfq$Lqn/7MDaxbfgkKbDETAB.2sPuqvXJxGFnldbuJqMUBqczlMM1nNTrV5Kld7KwBvAkky6vJlQziYPqJS/ge88n.
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:7a
hostname: leaf01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.1/32: {}
enable: on
router-id: 10.10.10.1
cumulus@leaf02:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
10,20,30: {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 10
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 20
type: bond
bond3:
bond:
lacp-bypass: on
member:
swp3: {}
mlag:
enable: on
id: 3
bridge:
domain:
br_default:
access: 30
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.2/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.2/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.2/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan10:
ip:
address:
10.1.10.3/24: {}
vrr:
address:
10.1.10.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 10
vlan20:
ip:
address:
10.1.20.3/24: {}
vrr:
address:
10.1.20.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 20
vlan30:
ip:
address:
10.1.30.3/24: {}
vrr:
address:
10.1.30.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 30
mlag:
backup:
10.10.10.1: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:AA
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
delay: 80
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$VYY4ykwe0LrdedRG$MNfa/eX7COUh57bGG2pZJROnvBWDfOQCnowaOiuKumvVyno/4fvWbEMEbaACLqsAQMGw5SYtgtTn.5WU5USFo.
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:78
hostname: leaf02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.2/32: {}
enable: on
router-id: 10.10.10.2
cumulus@spine01:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
interface:
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.101/32: {}
type: loopback
swp1:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp2:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp5:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp6:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$m.snt3F/unawCsit$8frw1.klD4wdYPMjb/chqYLihsDvjLtoT2913fZ/3p9vZfXRsAkcjV0O2mpOoLrvrM2uZlLIYVgxqoHZH7c6t/
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:82
hostname: spine01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.101/32: {}
enable: on
router-id: 10.10.10.101
cumulus@spine02:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
interface:
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.102/32: {}
type: loopback
swp1:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp2:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp5:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp6:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$UWQi/FawiF0WBP.8$zlLS2.FiUHsZ37L6v/8MmV9W0CVjdbyn4PSDwm5Cr6Ct02EtvAihYXgUy9owXAx0jQYIm2XbKBunxN6VpEr4X1
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:92
hostname: spine02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.102/32: {}
enable: on
router-id: 10.10.10.102
cumulus@border01:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
'2001': {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 2001
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 2001
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.63/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.63/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.63/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan2001:
ip:
address:
10.1.201.2/24: {}
vrr:
address:
10.1.201.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 1
enable: on
type: svi
vlan: 2001
mlag:
backup:
10.10.10.64: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:FF
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$siKWEoNyDqJpzgTg$kjQ12uQTIHRnsbF0hYbbPfRP6PRuCSk66Q79KHKEJVcx.raueCfL3hiW4FxqgDBOxWxLTC.U8fYeASiKvBS7A0
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:74
hostname: border01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.63/32: {}
enable: on
router-id: 10.10.10.63
cumulus@border02:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
'2001': {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 2001
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 2001
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.64/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.64/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.64/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan2001:
ip:
address:
10.1.201.3/24: {}
vrr:
address:
10.1.201.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 1
enable: on
type: svi
vlan: 2001
mlag:
backup:
10.10.10.63: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:FF
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$tJNymcft48141Lz5$cEJBzLJTIQSgIIPOLRSLFPgVPR0QkBUXY1pVAPraVuatKWGS9s.AdUZCd0ayHqgCfwvYyECf9e93VYkdl4wgM0
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:7c
hostname: border02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.64/32: {}
enable: on
router-id: 10.10.10.64
cumulus@leaf01:mgmt:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.1/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.1/32
auto swp52
iface swp52
address 10.10.10.1/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 10
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 20
auto bond3
iface bond3
bond-slaves swp3
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 3
bridge-access 30
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.2
clagd-sys-mac 44:38:39:FF:00:AA
clagd-args –initDelay 180
auto vlan10
iface vlan10
address 10.1.10.2/24
address-virtual 00:00:5e:00:01:00 10.1.10.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 10
auto vlan20
iface vlan20
address 10.1.20.2/24
address-virtual 00:00:5e:00:01:00 10.1.20.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 20
auto vlan30
iface vlan30
address 10.1.30.2/24
address-virtual 00:00:5e:00:01:00 10.1.30.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 30
auto br_default
iface br_default
bridge-ports bond1 bond2 bond3 peerlink
hwaddress 44:38:39:22:01:b1
bridge-vlan-aware yes
bridge-vids 10 20 30
bridge-pvid 1
cumulus@leaf02:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.2/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.2/32
auto swp52
iface swp52
address 10.10.10.2/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 10
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 20
auto bond3
iface bond3
bond-slaves swp3
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 3
bridge-access 30
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.1
clagd-sys-mac 44:38:39:FF:00:AA
clagd-args –initDelay 180
auto vlan10
iface vlan10
address 10.1.10.3/24
address-virtual 00:00:5e:00:01:00 10.1.10.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 10
auto vlan20
iface vlan20
address 10.1.20.3/24
address-virtual 00:00:5e:00:01:00 10.1.20.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 20
auto vlan30
iface vlan30
address 10.1.30.3/24
address-virtual 00:00:5e:00:01:00 10.1.30.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 30
auto br_default
iface br_default
bridge-ports bond1 bond2 bond3 peerlink
hwaddress 44:38:39:22:01:af
bridge-vlan-aware yes
bridge-vids 10 20 30
bridge-pvid 1
cumulus@spine01:~$ cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.101/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp1
iface swp1
address 10.10.10.101/32
auto swp2
iface swp2
address 10.10.10.101/32
auto swp5
iface swp5
address 10.10.10.101/32
auto swp6
iface swp6
address 10.10.10.101/32
cumulus@spine02:~$ cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.102/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp1
iface swp1
address 10.10.10.102/32
auto swp2
iface swp2
address 10.10.10.102/32
auto swp5
iface swp5
address 10.10.10.102/32
auto swp6
iface swp6
address 10.10.10.102/32
cumulus@border01:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.63/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.63/32
auto swp52
iface swp52
address 10.10.10.63/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 2001
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 2001
auto vlan2001
iface vlan2001
address 10.1.201.2/24
address-virtual 00:00:5e:00:01:00 10.1.201.1/24
hwaddress 44:38:39:22:01:ab
vlan-raw-device br_default
vlan-id 2001
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.64
clagd-sys-mac 44:38:39:FF:00:FF
clagd-args –initDelay 180
auto br_default
iface br_default
bridge-ports bond1 bond2 peerlink
hwaddress 44:38:39:22:01:ab
bridge-vlan-aware yes
bridge-vids 1
bridge-pvid 1
cumulus@border02:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.64/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.64/32
auto swp52
iface swp52
address 10.10.10.64/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 2001
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 2001
auto vlan2001
iface vlan2001
address 10.1.201.3/24
address-virtual 00:00:5e:00:01:00 10.1.201.1/24
hwaddress 44:38:39:22:01:b3
vlan-raw-device br_default
vlan-id 2001
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.63
clagd-sys-mac 44:38:39:FF:00:FF
clagd-args –initDelay 180
auto br_default
iface br_default
bridge-ports bond1 bond2 peerlink
hwaddress 44:38:39:22:01:b3
bridge-vlan-aware yes
bridge-vids 1
bridge-pvid 1
cumulus@leaf01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan10
ip ospf area 0
router ospf
passive-interface vlan10
interface vlan20
ip ospf area 0
router ospf
passive-interface vlan20
interface vlan30
ip ospf area 0
router ospf
passive-interface vlan30
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.1
timers throttle spf 80 100 6000
! end of router ospf block
cumulus@leaf02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan10
ip ospf area 0
router ospf
passive-interface vlan10
interface vlan20
ip ospf area 0
router ospf
passive-interface vlan20
interface vlan30
ip ospf area 0
router ospf
passive-interface vlan30
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.2
timers throttle spf 80 100 6000
! end of router ospf block
cumulus@spine01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp1
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp2
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp5
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp6
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.101
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@spine02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp1
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp2
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp5
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp6
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.102
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@border01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan2001
ip ospf area 1
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.63
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@border02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan2001
ip ospf area 1
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.64
timers throttle spf 0 100 6000
! end of router ospf block
The simulation starts with the example OSPF configuration. The demo is pre-configured using NVUE commands.
To validate the configuration, run the commands listed in the Troubleshooting section.