If you are using the current version of Cumulus Linux, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

Troubleshoot SNMP

Use the following commands to troubleshoot potential SNMP issues:

cumulus@switch:~$ net show snmp-server status
Simple Network Management Protocol (SNMP) Daemon.
---------------------------------  ------------------------------------------------------------------------------------
Current Status                     failed (failed)
Reload Status                      enabled
Listening IP Addresses             localhost 9.9.9.9
Main snmpd PID                     0
Version 1 and 2c Community String  Configured
Version 3 Usernames                Not Configured
Last Logs (with Errors)            -- Logs begin at Thu 2017-08-03 16:23:05 UTC, end at Fri 2017-08-04 18:17:24 UTC. --
                                   Aug 04 18:17:19 cel-redxp-01 snmpd[8389]: Error opening specified endpoint "9.9.9.9"
                                   Aug 04 18:17:19 cel-redxp-01 snmpd[8389]: Server Exiting with code 1
---------------------------------  ------------------------------------------------------------------------------------

cumulus@switch:~$ net show configuration snmp-server
snmp-server
  listening-address 127.0.0.1
  readonly-community public access default
  readonly-community allpass access any
  readonly-community temp2 access 1.1.1.1
  readonly-community temp2 access 2.2.2.2
  trap-destination 1.1.1.1 community-password public version 2c
  trap-link-up check-frequency 10
  trap-snmp-auth-failures

Troubleshoot SNMP

Products

Solutions

Learn