layout-3 layout-6 layout-1 layout-top
NVIDIA Docs Hubchevron_right NVIDIA Networkingchevron_right Networking Softwarechevron_right Switch Softwarechevron_right Cumulus Linuxchevron_right

NVUE Command Reference

layout-top layout-6 layout-1

Neighbor Discovery

nv show interface <interface-id> ip neighbor-discovery

Shows ND settings for an interface.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery
                      applied
--------------------  -------
enable                on     
router-advertisement         
  enable              off    
home-agent                   
  enable              off

nv show interface <interface-id> ip neighbor-discovery dnssl

Shows the DNSSLdomain suffixes configured on the specified interface.

You must use --applied with this command to show the output.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery dnssl --applied
No Data

nv show interface <interface-id> ip neighbor-discovery dnssl <domain-name-id>

Shows configuration information for the specified DNSSLdomain suffix.

You must use --applied with this command to show the output.

Command Syntax

Syntax Description
<interface-id> The interface name.
<domain-name-id> The domain portion of a hostname (RFC 1123) or an internationalized hostname (RFC 5890).

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery dnssl accounting.nvidia.com --applied
--------  --------
lifetime  infinite

nv show interface <interface-id> ip neighbor-discovery home-agent

Shows Home Agent configuration for an interface, such as the maximum amount of time the router acts as a Home Agent and the router preference.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery home-agent
            applied
----------  -------
enable      on     
lifetime    200    
preference  0

nv show interface <interface-id> ip neighbor-discovery prefix

Shows the ND prefixes for the specified interface.

You must use --applied with this command to show the output.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery prefix --applied
No Data

nv show interface <interface-id> ip neighbor-discovery prefix <ipv6-prefix-id>

Shows ND prefix configuration for the specified interface, such as the amount of time the prefix is valid for on-link determination, the amount of time that addresses generated from a prefix remain preferred, and if the specified prefix uses the IPv6 autoconfiguration setting.

Command Syntax

Syntax Description
<interface-id> The interface name.
<ipv6-prefix-id> The IPv6 address and route prefix.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery prefix 2001:db8:1::100/32
                    applied   
------------------  ----------
autoconfig          on        
off-link            on        
preferred-lifetime  100000    
router-address      on        
valid-lifetime      2000000000

nv show interface <interface-id> ip neighbor-discovery rdnss

Shows the RDNSS configured on the specified interface.

You must use --applied with this command to show the output.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery rdnss --applied
No Data

nv show interface <interface-id> ip neighbor-discovery rdnss <ipv6-address-id>

Shows configuration for the specified RDNSS configured on the specified interface.

You must use --applied with this command to show the output.

Command Syntax

Syntax Description
<interface-id> The interface name.
<ipv6-address-id> The IPv6 address of the RDNSS.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery rdnss 2001:db8:1::100 --applied
No Data

nv show interface <interface-id> ip neighbor-discovery router-advertisement

Shows router advertisement configuration for an interface, such as the hop limit value advertised in a router advertisement message, the maximum amount of time that router advertisement messages can exist on the route, the interval at which neighbor solicitation messages retransmit, and if fast transmit mode is on.

Command Syntax

Syntax Description
<interface-id> The interface name.

Version History

Introduced in Cumulus Linux 5.1.0

Example

cumulus@switch:~$ nv show interface swp1 ip neighbor-discovery router-advertisement
                   applied
-----------------  -------
enable             off    
fast-retransmit    off    
hop-limit          64     
interval           600000 
interval-option    off    
lifetime           1800   
managed-config     off    
other-config       off    
reachable-time     0      
retransmit-time    0      
router-preference  medium

nv show interface neighbor

Shows all the entries in the IP neighbor table.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface neighbor
Interface      IP/IPV6                    LLADR(MAC)         State      Flag      
-------------  -------------------------  -----------------  ---------  ----------
eth0           192.168.200.251            48:b0:2d:00:00:01  stale                
               192.168.200.1              48:b0:2d:aa:8b:45  reachable            
               fe80::4ab0:2dff:fe00:1     48:b0:2d:00:00:01  reachable  router    
peerlink.4094  169.254.0.1                48:b0:2d:3f:69:d6  permanent            
               fe80::4ab0:2dff:fe3f:69d6  48:b0:2d:3f:69:d6  reachable  router    
swp51          169.254.0.1                48:b0:2d:a2:4c:79  permanent            
               fe80::4ab0:2dff:fea2:4c79  48:b0:2d:a2:4c:79  reachable  router    
swp52          169.254.0.1                48:b0:2d:48:f1:ae  permanent            
               fe80::4ab0:2dff:fe48:f1ae  48:b0:2d:48:f1:ae  reachable  router    
swp53          169.254.0.1                48:b0:2d:2d:de:93  permanent            
               fe80::4ab0:2dff:fe2d:de93  48:b0:2d:2d:de:93  reachable  router    
swp54          169.254.0.1                48:b0:2d:80:8c:21  permanent            
               fe80::4ab0:2dff:fe80:8c21  48:b0:2d:80:8c:21  reachable  router    
vlan10         10.1.10.3                  44:38:39:22:01:78  permanent            
               10.1.10.101                48:b0:2d:a1:3f:4b  reachable            
               10.1.10.104                48:b0:2d:1d:d7:e8  noarp      |ext_learn
               fe80::4ab0:2dff:fea1:3f4b  48:b0:2d:a1:3f:4b  reachable            
               fe80::4ab0:2dff:fe1d:d7e8  48:b0:2d:1d:d7:e8  noarp      |ext_learn
               fe80::4638:39ff:fe22:178   44:38:39:22:01:78  permanent
...

nv show interface <interface-id> neighbor

Shows all the entries in the IP neighbor table for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor
ipv4
=========
    IPV4         LLADR(MAC)         
    -----------  -----------------  
    10.5.5.51    00:00:5e:00:53:51      
    169.254.0.1  48:b0:2d:a2:4c:79
ipv6
=========
    IPV6                       LLADR(MAC)         
    -------------------------  -----------------
    fe80::4ab0:2dff:fea2:4c79  48:b0:2d:a2:4c:79

nv show interface <interface-id> neighbor ipv4

Shows all IPv4 table entries for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp1 neighbor ipv4
IPV4         LLADR(MAC)       
-----------  -----------------
169.254.0.1  48:b0:2d:4d:1a:ed

nv show interface <interface-id> neighbor ipv4 <neighbor-id>

Shows table entries for an interface with a specific IPv4 address.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv4 address of the neighbor.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv4 169.254.0.1
lladdr
=========
    LLADR(MAC)         State      Flag
    -----------------  ---------  ----
    48:b0:2d:4d:1a:ed  permanent

nv show interface <interface-id> neighbor ipv4 <neighbor-id> lladdr <lladdr-id> state

Shows the state of the neighbor in the IPv4 neighbor table for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv4 address of the neighbor.
<lladdr-id> The MAC address associated with IPv4 address.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv4 169.254.0.1 lladdr 48:b0:2d:4d:1a:ed state
operational  applied
-----------  -------
permanent

nv show interface <interface-id> neighbor ipv4 <neighbor-id> lladdr <lladdr-id> flag

Shows the flag set for the neighbor in the IPv4 neighbor table for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv4 address of the neighbor.
<lladdr-id> The MAC address associated with IPv4 address.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv4 169.254.0.1 lladdr 48:b0:2d:4d:1a:ed flag
  operational  applied  
   -----------  ---------
   is-router    is-router

nv show interface <interface-id> neighbor ipv6

Shows all IPv6 table entries for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp1 neighbor ipv6
IPV6                       LLADR(MAC)
-------------------------  -----------------
fe80::1e34:daff:fe6c:dd8   1c:34:da:6c:0d:d8
fe80::3e2c:30ff:fe4b:800   3c:2c:30:4b:08:00

nv show interface <interface-id> neighbor ipv6 <neighbor-id>

Shows table entries for an interface with a specific IPv6 address.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv6 address of the neighbor.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv6 fe80::4ab0:2dff:fea2:4c79
lladdr
=========
    LLADR(MAC)         State      Flag
    -----------------  ---------  ----
    00:00:5E:00:53:51  permanent

nv show interface <interface-id> neighbor ipv6 <neighbor-id> lladdr <lladdr-id> state

Shows the state of the neighbor in the IP neighbor table for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv6 address of the neighbor.
<lladdr-id> The MAC address associated with IPv6 address.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv6 fe80::4ab0:2dff:fea2:4c79 lladdr 00:00:5E:00:53:51 state
No Data

nv show interface <interface-id> neighbor ipv6 <neighbor-id> lladdr <lladdr-id> flag

Shows the flag set for the neighbor in the IP neighbor table for the specified interface.

Command Syntax

Syntax Description
<interface-id> The interface.
<neighbor-id> The IPv6 address of the neighbor.
<lladdr-id> The MAC address associated with IPv6 address.

Version History

Introduced in Cumulus Linux 5.7.0

Example

cumulus@switch:~$ nv show interface swp51 neighbor ipv6 fe80::4ab0:2dff:fea2:4c79 lladdr 00:00:5E:00:53:51 flag
  operational  applied  
   -----------  ---------
   is-router    is-router

nv show system global nd

Shows ND settings, such as the neighbor base reachable timer and garbage collection settings.

Version History

Introduced in Cumulus Linux 5.6.0

Example

cumulus@switch:~$ nv show system global nd
                              operational  applied  
----------------------------  -----------  ------- 
base-reachable-time           50           50      
garbage-collection-threshold                               
  effective                   17920                        
  maximum                     20480                        
  minimum                     128

nv show system global nd garbage-collection-threshold

Shows the ND garbage collection threshold settings.

Version History

Introduced in Cumulus Linux 5.6.0

Example

cumulus@switch:~$ nv show system global nd garbage-collection-threshold
           operational  applied
---------  -----------  -------
effective  35840               
maximum    40960               
minimum    128

    Copyright © 2024  NVIDIA Corporation