BGP IPv6
nv show vrf <vrf-id> router bgp address-family ipv6-unicast
Shows BGP IPv6 configuration for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast
operational applied pending
------ ----------- ------- -------
enable off off
nv show vrf <vrf-id> router bgp address-family ipv6-unicast admin-distance
Shows the BGP IPv6 admin distances configured for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast admin-distance
operational applied
-------- ----------- -------
external 20
internal 200
nv show vrf <vrf-id> router bgp address-family ipv6-unicast aggregate-route
Shows BGP IPv6 aggregate routes for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast aggregate-route
nv show vrf <vrf-id> router bgp address-family ipv6-unicast aggregate-route <aggregate-route-id>
Shows IPv6 aggregate routes. Aggregating a range of networks in your routing table into a single prefix can minimize the size of the routing table and save bandwidth.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<aggregate-route-id> |
The IPv6 address and route prefix in CIDR notation. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast aggregate-route 2001:db8::1/128
operational applied
------------ ----------- ---------
as-set on
route-map routemap1
summary-only on
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib
Shows the IPv6 local RIB for the specified VRF.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib
IPV6 Routes
==============
PathCount - Number of paths present for the prefix, MultipathCount - Number of
paths that are part of the ECMP, DestFlags - * - bestpath-exists, w - fib-wait-
for-install, s - fib-suppress, i - fib-installed, x - fib-install-failed,
LocalPref - Local Preference, Best - Best path, Reason - Reason for selection
Prefix PathCount MultipathCount DestFlags Nexthop Metric Weight LocalPref Aspath Best Reason Flags
------------- --------- -------------- --------- ------- ------ ------ --------- ------ ---- ------ -----
2001:db8::/64 2 1 *
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id>
Shows information about the specified IPv6 route in the local RIB, such as the BGP neighbor to which the path is advertised and the path count.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128
operational
---------- -----------
[path] 1
[path] 2
[advertised-to] swp1
[advertised-to] swp2
path-count 2
multipath-count 1
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path
Shows the paths for the specified IPv6 route in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Add -o json
at the end of the command to see the output in a more readable format.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path -o json
{
"1": {
"aspath": {},
"bestpath": {
"overall": "yes",
"selection-reason": "Origin"
},
"flags": {
"bestpath": {},
"valid": {}
},
"flags-string": "*v",
"last-update": "2024-08-06T04:52:35Z",
"local": "on",
"metric": 0,
"nexthop": {
"1": {
"accessible": "on",
"afi": "ipv6",
"ip": "::",
"metric": 0,
"scope": "global",
"used": "on"
}
},
"nexthop-count": 1,
"origin": "IGP",
"peer": {
"id": "::",
"router-id": "10.10.10.1"
},
"sourced": "on",
"valid": "on",
"weight": 32768
}
}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id>
Shows information about the paths for the specified IPv6 route in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
You must add -o json
at the end of the command to see the output.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 1 -o json
{
"aspath": {},
"bestpath": {
"overall": "yes",
"selection-reason": "Origin"
},
"flags": {
"bestpath": {},
"valid": {}
},
"flags-string": "*v",
"last-update": "2024-08-06T04:52:36Z",
"local": "on",
"metric": 0,
"nexthop": {
"1": {
"accessible": "on",
"afi": "ipv6",
"ip": "::",
"metric": 0,
"scope": "global",
"used": "on"
}
},
"nexthop-count": 1,
"origin": "IGP",
"peer": {
"id": "::",
"router-id": "10.10.10.1"
},
"sourced": "on",
"valid": "on",
"weight": 32768
}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> nexthop
Shows the next hops for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
You must add -o json
at the end of the command to see the output.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 2 nexthop -o json
{
"1": {
"accessible": "off",
"afi": "ipv6",
"ip": "::",
"metric": 0,
"scope": "global",
"used": "on"
}
}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> nexthop <nexthop-id>
Shows next hop information for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
You must add -o json
at the end of the command to see the output.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id |
The path ID. |
<nexthop-id> |
The nexthop ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 1 nexthop 1 -o json
{
"accessible": "off",
"afi": "ipv6",
"ip": "::",
"scope": "global",
"used": "on"
}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> peer
Shows BGP neighbor information for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
You must add -o json
at the end of the command to see the output.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 1 peer -o json
{
"id": "::",
"router-id": "10.10.10.1"
}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> flags
Shows route path flags for the specified IPv6 route in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
You must add -o json
at the end of the command to see the output.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 1 flags -o json
{}
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> bestpath
Shows best path information, such as the selection reason, for the specified IPv6 route in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 1 bestpath
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> aspath
Shows the AS paths for the specified IPv6 route in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 2 aspath
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> community
Shows the community names for the community list for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 2 community
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> large-community
Shows the community names for the large community list for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 2 large-community
nv show vrf <vrf-id> router bgp address-family ipv6-unicast loc-rib route <route-id> path <path-id> ext-community
Shows the community names for the extended community list for the specified IPv6 route path in the local RIB.
Cumulus Linux 5.11 and later no longer provides this command. Use the nv show vrf <vrf-id> router bgp address-family ipv6-unicast route <route-id>
command instead.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 address and route prefix in CIDR notation. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast loc-rib route 2001:db8::1/128 path 2 ext-community
nv show vrf <vrf-id> router bgp address-family ipv6-unicast multipaths
Shows BGP IPv6 multipath configuration for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast multipaths
No Data
nv show vrf <vrf-id> router bgp address-family ipv6-unicast network
Shows the IPv6 static networks for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast network
nv show vrf <vrf-id> router bgp address-family ipv6-unicast network <static-network-id>
Shows information about a specific IPv6 static network for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<static-network-id> |
The IPv6 address and route prefix in CIDR notation. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast network 2001:db8::1/128
nv show vrf <vrf-id> router bgp address-family ipv6-unicast redistribute
Shows configuration information for BGP IPv6 route redistribution for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast redistribute
operational applied
----------- ----------- -------
static
enable off
connected
enable on
metric auto
route-map none
kernel
enable off
ospf6
enable off
nv show vrf <vrf-id> router bgp address-family ipv6-unicast redistribute static
Shows configuration information for BGP IPv6 static route redistribution for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast redistribute static
operational applied
------ ----------- -------
enable on
nv show vrf <vrf-id> router bgp address-family ipv6-unicast redistribute connected
Shows configuration information for BGP IPv6 connected route redistribution for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast redistribute connected
operational applied
------ ----------- -------
enable on
metric auto
route-map none
nv show vrf <vrf-id> router bgp address-family ipv6-unicast redistribute kernel
Shows configuration information for BGP IPv6 kernel route redistribution for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast redistribute kernel
operational applied
------ ----------- -------
enable off
nv show vrf <vrf-id> router bgp address-family ipv6-unicast redistribute ospf6
Shows configuration information for BGP OSPF IPv6 route redistribution for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast redistribute ospf6
operational applied
------ ----------- -------
enable on
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route
Shows BGP IPv6 routing table.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.11.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route
No Data
nv show vrf <vrf-id> router bgp address-family ipv4-unicast route <route-id>
Shows information about the BGP IPv4 route.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<route-id> |
The IPv6 route. |
Version History
Introduced in Cumulus Linux 5.11.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route 2001:db8:2::a00:1
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-count
Shows the BGP IPv6 route and path count.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.11.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-count
operational applied
------------ ----------- -------
total-routes 13 13
total-paths 46 46
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-import
Shows BGP IPv6 route import configuration for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-import
operational applied
-------------- ----------- -------
from-vrf
enable off
[list] none
[route-target] none
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-import from-vrf
Shows configuration information about VRF to VRF IPv6 route leaking.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-import from-vrf
operational applied
------ ----------- -------
enable off
[list] none
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-import from-vrf list
Shows IPv6 routes in the BGP RIB that are dynamically leaked between VRFs.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-import from-vrf list
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-export
Shows BGP IPv6 route export configuration for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-export
operational applied
-------------- ----------- -------
to-evpn
enable off
[route-target] none
to-vrf
[list] none
rd none
nv show vrf <vrf-id> router bgp address-family ipv6-unicast route-export to-evpn
Shows configuration for IPv6 prefix-based routing using EVPN type-5 routes. Type-5 routes (or prefix routes) primarily route to destinations outside of the data center fabric. EVPN prefix routes carry the layer 3 VNI and router MAC address and follow the symmetric routing model to route to the destination prefix.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast route-export to-evpn
No Data
nv show vrf <vrf-id> router bgp address-family ipv6-unicast soo-route
Shows the BGP Site-of-Origin IPv6 routes.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.8.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast soo-route
nv show vrf <vrf-id> router bgp address-family ipv6-unicast update-group
Shows the BGP IPv6 update groups for the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
Version History
Introduced in Cumulus Linux 5.4.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast update-group
nv show vrf <vrf-id> router bgp address-family ipv6-unicast update-group <group-id>
Shows information about a specific BGP IPv6 update group in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<group-id> |
The group ID. |
Version History
Introduced in Cumulus Linux 5.4.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast update-group 2
nv show vrf <vrf-id> router bgp address-family ipv6-unicast update-group <group-id> sub-group
Shows the subgroups for a specific BGP IPv6 update group in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<group-id> |
The group ID. |
Version History
Introduced in Cumulus Linux 5.4.0
Example
cumulus@switch:~$ nv show vrf default router bgp address-family ipv6-unicast update-group 2 subgroup
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast
Shows configuration information for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast
operational applied
------ ----------- -------
enable off
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes
Shows information about the IPv6 advertised routes for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id>
Shows information about a specific IPv6 advertised route for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path
Shows information about the IPv6 advertised route paths for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id>
Shows information about a specific IPv6 advertised route path for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> aspath
Shows information about the IPv6 advertised route AS path for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 aspath
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> bestpath
Shows information about the IPv6 advertised route best path for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 bestpath
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> community
Shows information about the IPv6 advertised route communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> ext-community
Shows information about the IPv6 advertised route extended communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 ext-community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> flags
Shows information about the IPv6 advertised route flags for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 flags
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> large-community
Shows information about the IPv6 advertised route large communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 large-community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> nexthop
Shows information about the IPv6 advertised route nexthops for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 nexthop
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast advertised-routes <route-id> path <path-id> peer
Shows information about the IPv6 advertised route peers for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 peers
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast advertised-routes 2001:db8::1/128 path 1 flags
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast aspath
Shows the configuration settings for handling the AS path for prefixes to and from the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast aspath
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast aspath allow-my-asn
Shows if it is acceptable for a received AS path from the specified IPv6 neighbor to contain the ASN of the local system.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast aspath allow-my-asn
operational applied
------ ----------- -------
enable on
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast attribute-mod
Shows the attribute modification configuration settings for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast attribute-mod
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast capabilities
Shows all advertised and received capabilities for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast capabilities
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast community-advertise
Shows community advertise configuration information for the specified BGP IPv6 neighbor. The community advertise option determines if the neighbor can advertise a prefix to any iBGP or eBGP neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast community-advertise
operational applied pending
-------- ----------- ------- -------
extended on
large off
regular on
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast conditional-advertise
Shows conditional advertisement configuration information for the specified BGP IPv6 neighbor. The BGP conditional advertisement option lets you advertise certain routes only if other routes either do or do not exist.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast conditional-advertise
operational applied pending
------ ----------- ------- -------
enable on
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast default-route-origination
Shows default route origination configuration for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast default-route-origination
operational applied pending
------ ----------- ------- -------
enable on
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast graceful-restart
Shows BGP graceful restart configuration information for the specified BGP IPv6 neighbor. BGP graceful restart minimizes the negative effects that occur when BGP restarts.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast graceful-restart
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast graceful-restart timers
Shows the BGP graceful restart selection deferral and stale path timer settings for the BGP neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.9.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast graceful-restart timers
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast graceful-restart timers selection-deferral
Shows the BGP graceful restart selection deferral timers for the BGP neighbor.
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.9.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast graceful-restart timers selection-deferral
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast graceful-restart timers stale-path
Shows the BGP graceful restart stale path timer settings for the BGP neighbor.
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.9.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast graceful-restart timers stale-path
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast policy
Shows policies for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast policy
inbound
route-map map-inbound
aspath-list none
prefix-list none
outbound
route-map map-outbound
unsuppress-map none
aspath-list none
prefix-list none
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast policy inbound
Shows the inbound policy for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast policy inbound
operational applied pending
----------- ----------- ------- -------
route-map map-inbound
aspath-list none
prefix-list none
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast policy outbound
Shows the outbound policy for the specified BGP IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast policy outbound
operational applied pending
-------------- ----------- ------- -------
route-map map-outbound
unsuppress-map none
aspath-list none
prefix-list none
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast prefix-limits
Shows limits on prefixes from the specified IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast prefix-limits
operational applied
------------------- ----------- -------
inbound
maximum none
warning-threshold 75
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast prefix-limits inbound
Shows the limits on inbound prefixes from the specified IPv6 neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The BGP neighbor name or interface (for BGP unnumbered). |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast prefix-limits inbound
operational applied
----------------- ----------- -------
maximum none
warning-threshold 75
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes
Shows information about the IPv6 received routes for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id>
Shows information about a specific IPv6 received route for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path
Shows information about IPv6 received route paths for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id>
Shows information about a specific IPv6 received route path for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> aspath
Shows information about the IPv6 received route path AS path for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 aspath
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> bestpath
Shows information about the IPv6 received route path bestpath for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 bestpath
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> community
Shows information about the IPv6 received route path communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> ext-community
Shows information about the IPv6 received route path extended communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 ext-community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> flags
Shows information about the IPv6 received route path flags for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 flags
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> large-community
Shows information about the IPv6 received route path large communities for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 large-community
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> nexthop
Shows information about the IPv6 received route path nexthops for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 nexthop -o json
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> nexthop <nexthop-id>
Shows information about a specific IPv6 received route path nexthop for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
<nexthop-id> |
The nexthop ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 nexthop 1
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast received-routes <route-id> path <path-id> peer
Shows information about the IPv6 received route path peers for a BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
<route-id> |
The IPv6 route. |
<path-id> |
The path ID. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast received-routes 2001:db8::1/128 path 1 peer
nv show vrf <vrf-id> router bgp neighbor <neighbor-id> address-family ipv6-unicast route-counters
Shows the number of IPv6 routes for a specific BGP neighbor in the specified VRF.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<neighbor-id> |
The IP address of the BGP neighbor or the interface if you are using unnumbered BGP. |
Version History
Introduced in Cumulus Linux 5.5.0
Example
cumulus@switch:~$ nv show vrf default router bgp neighbor swp51 address-family ipv6-unicast route-counters
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast
Shows if IPv6 is configured for the peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group underlay address-family ipv6-unicast
operational applied
------ ----------- -------
enable off
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast aspath
Shows the configuration settings for handling the AS path for prefixes to and from the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast aspath
applied
--------------- -------
private-as none
replace-peer-as off
allow-my-asn
enable on
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast aspath allow-my-asn
Shows if it is acceptable for a received AS path from the specified BGP IPv6 peer group to contain the ASN of the local system.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast aspath allow-my-asn
applied
------ -------
enable on
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast attribute-mod
Shows the attribute modification configuration settings for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast attribute-mod
applied
------- -------
aspath on
med on
nexthop on
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast community-advertise
Shows community advertise configuration information for the specified BGP IPv6 peer group. The community advertise option determines if the neighbor can advertise a prefix to any iBGP or eBGP neighbor.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast community-advertise
applied
-------- -------
extended on
large off
regular on
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast conditional-advertise
Shows conditional advertisement configuration information for the specified BGP IPv6 peer group. The BGP conditional advertisement option lets you advertise certain routes only if other routes either do or do not exist.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast conditional-advertise
applied
------ -------
enable on
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast default-route-origination
Shows default route origination configuration for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast default-route-origination
applied
------ -------
enable off
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast default-origination
Shows default route origination configuration for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group underlay address-family ipv6-unicast default-route-origination
No Data
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast policy
Shows the policies for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast policy
applied
---------------- ------------
inbound
route-map MAP1
aspath-list none
prefix-list none
outbound
route-map none
unsuppress-map none
aspath-list myaspathlist
prefix-list none
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast policy inbound
Shows the inbound policy for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast policy inbound
applied
----------- -------
route-map MAP1
aspath-list none
prefix-list none
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast policy outbound
Shows the outbound policy for the specified BGP IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast policy outbound
applied
-------------- ------------
route-map none
unsuppress-map none
aspath-list myaspathlist
prefix-list none
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast prefix-limits
Shows the limits on prefixes from the specified IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast prefix-limits
applied
------------------- -------
inbound
maximum none
warning-threshold 75
nv show vrf <vrf-id> router bgp peer-group <peer-group-id> address-family ipv6-unicast prefix-limits inbound
Shows the limits on inbound prefixes from the specified IPv6 peer group.
Command Syntax
Syntax | Description |
---|---|
<vrf-id> |
The VRF name. |
<peer-group-id> |
The peer group name. |
Version History
Introduced in Cumulus Linux 5.0.0
Example
cumulus@switch:~$ nv show vrf default router bgp peer-group SPINES address-family ipv6-unicast prefix-limits inbound
applied
----------------- -------
maximum none
warning-threshold 75