sFlow

The nv unset commands remove the configuration you set with the equivalent nv set commands. This guide only describes an nv unset command if it differs from the nv set command.


nv set system sflow agent interface

Configures the sFlow agent interface.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow agent interface eth0

nv set system sflow agent ip

Configures the sFlow agent IP address or prefix.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow agent ip 10.0.0.0/8

nv set system sflow collector

Configures the IP address of the designated sFlow collector.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow collector 192.0.2.100

nv set system sflow collector <collector-ip> interface

Configures the interface for the designated sFlow collector.

Command Syntax

Syntax Description
<collector-ip> The IP address of the collector.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow collector 192.0.2.200 interface eth0

nv set system sflow collector <collector-ip> port

Configures the UDP port number for the designated sFlow collector.

Command Syntax

Syntax Description
<collector-ip> The IP address of the collector.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow collector 192.0.2.100 port 6344

nv set system sflow dropmon hw

Configures sFlow to monitor dropped packets in hardware.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow dropmon shw 

nv set system sflow poll-interval

Configures the sFlow polling interval in seconds.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow poll-interval 20

nv set system sflow sampling-rate default

Configures the sFlow sampling rate to use the default rate.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate default

nv set system sflow sampling-rate speed-100m

Configures the sampling rate in number of packets for 100M interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-100m 40000

nv set system sflow sampling-rate speed-1g

Configures the sampling rate in number of packets for 1G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ 

nv set system sflow sampling-rate speed-10g

Configures the sampling rate in number of packets for 10G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-10G 10000

nv set system sflow sampling-rate speed-25g

Configures the sampling rate in number of packets for 25G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-25G 20000

nv set system sflow sampling-rate speed-40g

Configures the sampling rate in number of packets for 40G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-40G 40000

nv set system sflow sampling-rate speed-50g

Configures the sampling rate in number of packets for 50G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-50G 50000

nv set system sflow sampling-rate speed-100g

Configures the sampling rate in number of packets for 100G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-100G 100000

nv set system sflow sampling-rate speed-200g

Configures the sampling rate in number of packets for 200G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-200G 200000

nv set system sflow sampling-rate speed-400g

Configures the sampling rate in number of packets for 400G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-4000G 400000

nv set system sflow sampling-rate speed-800g

Configures the sampling rate in number of packets for 800G interfaces.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow sampling-rate speed-800G 800000

nv set system sflow state

Enables and disables sFlow; a monitoring protocol that samples network packets, application operations, and system counters.

Version History

Introduced in Cumulus Linux 5.11.0

Example

cumulus@switch:~$ nv set system sflow state enabled