PTM
The nv unset commands remove the configuration you set with the equivalent nv set commands. This guide only describes an nv unset command if it differs from the nv set command.
nv set router ptm state
Enables and disables PTM. When enabled, PTM performs additional checks to ensure that routing adjacencies form only on links that have connectivity and that conform to the specification that the ptmd service defines. The default setting is disabled.
In Cumulus Linux 5.14 and earlier, you specify enable on or enable off instead of state enabled or state disabled.
Version History
Introduced in Cumulus Linux 5.3.0
Example
cumulus@switch:~$ nv set router ptm state enabled