Spanning Tree Protocol
Use the CLI to view the STP topology on a bridge or switch with the netq show stp topology command.
The syntax for the show command is:
netq <hostname> show stp topology [around <text-time>] [json]
▼
spine1 show stp topology
The following example shows the STP topology as viewed from the spine1 switch:
cumulus@switch:~$ netq spine1 show stp topology
Root(spine1) -- spine1:sw_clag200 -- leaf2:EdgeIntf(sng_hst2) -- hsleaf21
-- leaf2:EdgeIntf(dual_host2) -- hdleaf2
-- leaf2:EdgeIntf(dual_host1) -- hdleaf1
-- leaf2:ClagIsl(peer-bond1) -- leaf1
-- leaf1:EdgeIntf(sng_hst2) -- hsleaf11
-- leaf1:EdgeIntf(dual_host2) -- hdleaf2
-- leaf1:EdgeIntf(dual_host1) -- hdleaf1
-- leaf1:ClagIsl(peer-bond1) -- leaf2
-- spine1:ClagIsl(peer-bond1) -- spine2
-- spine1:sw_clag300 -- edge1:EdgeIntf(sng_hst2) -- hsedge11
-- edge1:EdgeIntf(dual_host2) -- hdedge2
-- edge1:EdgeIntf(dual_host1) -- hdedge1
-- edge1:ClagIsl(peer-bond1) -- edge2
-- edge2:EdgeIntf(sng_hst2) -- hsedge21
-- edge2:EdgeIntf(dual_host2) -- hdedge2
-- edge2:EdgeIntf(dual_host1) -- hdedge1
-- edge2:ClagIsl(peer-bond1) -- edge1
Root(spine2) -- spine2:sw_clag200 -- leaf2:EdgeIntf(sng_hst2) -- hsleaf21
-- leaf2:EdgeIntf(dual_host2) -- hdleaf2
-- leaf2:EdgeIntf(dual_host1) -- hdleaf1
-- leaf2:ClagIsl(peer-bond1) -- leaf1
-- leaf1:EdgeIntf(sng_hst2) -- hsleaf11
-- leaf1:EdgeIntf(dual_host2) -- hdleaf2
-- leaf1:EdgeIntf(dual_host1) -- hdleaf1
-- leaf1:ClagIsl(peer-bond1) -- leaf2
-- spine2:ClagIsl(peer-bond1) -- spine1
-- spine2:sw_clag300 -- edge2:EdgeIntf(sng_hst2) -- hsedge21
-- edge2:EdgeIntf(dual_host2) -- hdedge2
-- edge2:EdgeIntf(dual_host1) -- hdedge1
-- edge2:ClagIsl(peer-bond1) -- edge1
-- edge1:EdgeIntf(sng_hst2) -- hsedge11
-- edge1:EdgeIntf(dual_host2) -- hdedge2
-- edge1:EdgeIntf(dual_host1) -- hdedge1
-- edge1:ClagIsl(peer-bond1) -- edge2
If you do not have a bridge in your configuration, the output indicates such.