layout-3 layout-6 layout-1 layout-top
NVIDIA Docs Hubchevron_right NVIDIA Networkingchevron_right Networking Softwarechevron_right Management Softwarechevron_right

NVIDIA NetQ

layout-top layout-6 layout-1

If you are using the current version of Cumulus NetQ, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

VLAN

Use the UI or CLI to view Virtual Local Area Network (VLAN) information.

VLAN Commands

Monitor VLAN with the following commands. Use these commands to display configuration information, interfaces associated with VLANs, MAC addresses associated with a given VLAN, MAC addresses associated with you vRR (virtual route reflector) interface configuration, and VLAN events. See the command line reference for additional options, definitions, and examples.

netq show vlan
netq show interfaces type macvlan
netq show interfaces type vlan 
netq show macs
netq show events message_type vlan

The netq check vlan command verifies consistency of the VLAN nodes and interfaces across all links in your network fabric:

netq check vlan

View VLAN in the UI

To view VLAN information, select the Menu, then enter VLANs in the search field.

From here you can view a list of switches or hostnames and their associated VLANs, interfaces, SVIs (switch virtual interfaces), and ports. To view MAC addresses associated with a given VLAN, select the Menu, then enter MACs in the search field.

    Copyright © 2024  NVIDIA Corporation