I through K Commands

This topic includes all commands that begin with netq i*, netq j*, and netq k*.

About Installation Commands

You can install NetQ with a single command or you can perform the individual steps using multiple commands. Generally, using the single command option is strongly recommended. However, the individual commands can be useful for troubleshooting the installation process when it fails. You might need to create a support ticket to take full advantage of the individual commands.

You can use these commands only after bootstrapping the physical server or VM. Refer to netq bootstrap.

On-premises single server

On-premises single server

On-premises server cluster

On-premises server cluster

Cloud/remote

Cloud/remote


netq install cluster activate-job

Activates a NetQ instance after an initial server cluster (master and two worker nodes) is configured and installed. Activation requires a configuration key that can be obtained from support.

Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install cluster activate-job
    config-key <text-opta-key>

Required Arguments

Argument Value Description
activate-job NA Activate NetQ instance
config-key <text-opta-key> Use this unique key to activate NetQ

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@switch:~$ netq install cluster activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHVzbmV0d29ya3MuY29cB3ag
  • netq install cluster infra-job
  • netq install cluster init-job
  • netq install cluster install-job
  • netq install cluster join-workers
  • netq install cluster full

netq install cluster full

Installs the NetQ Platform software on the servers (NetQ On-premises Appliances or VMs) in an on-premises, server cluster deployment, all with a single command. You must have the hostname or IP address of the master node and two worker nodes, and the NetQ software bundle to run the command.

Obtain the software release bundle from the My Mellanox support page.

Syntax

netq install cluster full
    (interface <text-opta-ifname>|ip-addr <text-ip-addr>)
    bundle <text-bundle-url>
    [config-key <text-opta-key>]
    workers <text-worker-01> <text-worker-02>

Required Arguments

Argument Value Description
full NA Install a server cluster, running all initialization and configuration commands automatically
interface <text-opta-ifname> Install a server cluster with a master node using this interface to communicate with the NetQ Agents on the worker nodes
ip-addr <text-ip-addr> Install a server cluster with a master node with this IP address to communicate with the NetQ Agents on the worker nodes
bundle <text-bundle-url> Install the NetQ software bundle at this location; you must specify a full path
workers <text-worker-01> <text-worker-02> Install the worker nodes with these IP addresses

Options

Option Value Description
conifg-key <text-opta-key> Use this unique key to install the server cluster

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Added ip-addr argument
2.4.0 Added cluster and full arguments. Removed download, file, and force options.
2.2.2 Added download options
Before 2.2.1 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install cluster full interface eth0 bundle /mnt/installables/NetQ-4.0.0.tgz workers 10.20.10.25 10.20.10.45
  • netq install cluster activate-job
  • netq install cluster infra-job
  • netq install cluster init-job
  • netq install cluster install-job
  • netq install cluster join-workers

netq install cluster init-job

Verifies master node (NetQ On-premises Appliance or VM) resources, extracts NetQ packages, configures Kubernetes, node services and Docker registry, and install the Cassandra database in preparation for NetQ installation and activation in a server cluster deployment.

Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install cluster init-job

Required Arguments

Argument Value Description
init-job NA Run the initialization jobs

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install cluster init-job
  • netq install cluster activate-job
  • netq install cluster infra-job
  • netq install cluster install-job
  • netq install cluster join-workers
  • netq install cluster full

netq install cluster join-workers

After initiating a NetQ installation, this command configures the first two worker nodes (NetQ On-premises Appliances or VMs) in a server cluster deployment.

Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.

Refer to Post Installation Configuration Options to add additional worker nodes after NetQ has been completely installed.

Syntax

netq install cluster join-workers
    <text-worker-01>
    [<text-worker-02>]

Required Arguments

Argument Value Description
join-workers NA Identify at least one worker node for the server cluster
NA <text-worker-node-01> IP address of server to configure as the first worker node in this server cluster

Options

Option Value Description
NA <text-worker-node-02> IP address of server to configure as the second worker node in this server cluster

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install cluster join-workers 192.168.10.23 192.168.10.25
  • netq install cluster activate-job
  • netq install cluster infra-job
  • netq install cluster init-job
  • netq install cluster install-job
  • netq install cluster full

netq install cluster infra-job

After initialization and configuring the worker nodes, this command installs the Kafka service and operators to aid in installation of the NetQ software.

Alternately, use netq install cluster full (on-premises) or netq install opta cluster (remote/cloud) to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install cluster infra-job

Required Arguments

Argument Value Description
infra-job NA Adds infrastructure aids to support installation

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install cluster infra-job
  • netq install cluster activate-job
  • netq install cluster init-job
  • netq install cluster install-job
  • netq install cluster join-workers
  • netq install cluster full

netq install cluster install-job

After you prepare and configure all the infrastructure, this command installs the NetQ software using the NetQ installation file that you previously downloaded and stored.

Obtain the software release bundle from the My Mellanox support page.

Alternately, use netq install cluster full (on-premises) or netq install opta cluster (remote/cloud) to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install cluster install-job
    bundle <text-bundle-url>

Required Arguments

Argument Value Description
install-job NA Install the NetQ software
bundle <text-bundle-url> Install the NetQ-x.y.z.tgz installation file at this location; you must specify a full path

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install cluster install-job bundle /mnt/installables/NetQ-4.0.0.tgz
  • netq install cluster activate-job
  • netq install cluster infra-job
  • netq install cluster init-job
  • netq install cluster join-workers
  • netq install cluster full

netq install opta activate-job

Activates the NetQ Collector software after you configure and install an initial server or server cluster (master and two worker nodes). Activation requires a configuration key that you can obtain from an email titled A new site has been added to your NVIDIA Cumulus NetQ account (sent to your NetQ administrator).

Syntax

netq install opta activate-job
    config-key <text-opta-key>

Required Arguments

Argument Value Description
activate-job NA Activate NetQ collector software
config-key <text-opta-key> Use this unique key to activate NetQ

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Introduced

Sample Usage

cumulus@switch:~$ netq install opta activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHV9f3lk0d29ya3MuY29cB3ag
  • netq install opta cluster
  • netq install opta standalone

netq install opta cluster

Installs the NetQ Collector software on a master node and two worker nodes. For cloud deployments, it installs the software on the NetQ Cloud Appliance or VM. For a multi-site on-premises deployment, it installs the software on one or two secondary servers at the external premises. You must have the hostname, IP address, or interface of the servers, the NetQ software bundle, and configuration key to run the command. You can also configure a proxy.

Obtain the software release bundle from the My Mellanox support page.

Obtain the config-key as follows:

  • Cloud: Locate and retrieve key from email titled A new site has been added to your NVIDIA Cumulus NetQ account (sent to your NetQ administrator)
  • Remote: Follow the instructions in Configure Multiple Premises

Syntax

netq install opta cluster full
    (interface <text-opta-ifname>|ip-addr <text-ip-addr>)
    bundle<text-bundle-url>
    config-key <text-opta-key>
    workers <text-worker-01> <text-worker-02>
    [proxy-host <text-proxy-host> proxy-port <text-proxy-port>]

Required Arguments

Argument Value Description
full NA Install a server with NetQ Collector software, running all initialization and configuration commands automatically
interface <text-opta-ifname> Install a server cluster with a master node using this interface to communicate with the NetQ Agents on the worker nodes
ip-addr <text-ip-addr> Install a server cluster with a master node with this IP address to communicate with the NetQ Agents on the worker nodes
bundle <text-bundle-url> Install the NetQ software bundle at this location; you must specify a full path
workers <text-worker-01> <text-worker-02> Install the worker nodes with these IP addresses
conifg-key <text-opta-key> Use this unique key to activate the software

Options

Option Value Description
proxy-host <text-proxy-host> Use the proxy server with this hostname or IP address instead of directly connecting to the NetQ Cloud Appliance or VM; you must also specify a port
proxy-port <text-proxy-port> Use this port on the proxy server instead of directly connecting to the NetQ Cloud Appliance or VM; you must also specify a proxy host

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Added ip-addr argument, proxy-host and proxy-port options
2.4.0 Added cluster and full arguments. Removed download, file, and force options.
2.2.2 Added download options
Before 2.2.1 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install opta cluster full interface en01 bundle /mnt/installables/NetQ-4.0.0.tgz config-key CI39fo5CZ3cucHJvZDEubmV0cS5jdW11bHVzbmVp6z8ma3MuY29tGLsD workers 10.20.10.25 10.20.10.45
  • netq install opta activate-job

netq install opta standalone

Installs the NetQ Collector software on a single cloud server (NetQ Cloud Appliance or VM) with a single command. You must have the hostname, IP address, or interface of the server, the NetQ software bundle, and configuration key to run the command. You can also configure a proxy.

Obtain the software release bundle from the My Mellanox support page.

Obtain the config-key from the email sent to your NetQ administrator titled A new site has been added to your NVIDIA Cumulus NetQ account.

Syntax

netq install opta standalone full
    (interface <text-opta-ifname>|ip-addr <text-ip-addr>)
    bundle <text-bundle-url>
    config-key <text-opta-key>
    [proxy-host <text-proxy-host> proxy-port<text-proxy-port>]

Required Arguments

Argument Value Description
full NA Install a server with NetQ Collector software, running all initialization and configuration commands automatically
interface <text-opta-ifname> Install NetQ on the server with this interface as the communication interface for the NetQ Agents on the monitored switches and hosts
ip-addr <text-ip-addr> Install NetQ on the server with this IP address to communicate with the NetQ Agents on the monitored switches and hosts
bundle <text-bundle-url> Install the NetQ software bundle at this location; you must specify a full path
conifg-key <text-opta-key> Use this unique key to activate the software

Options

Option Value Description
proxy-host <text-proxy-host> Use the proxy server with this hostname or IP address instead of directly connecting to the NetQ Cloud Appliance or VM; you must also specify a port
proxy-port <text-proxy-port> Use this port on the proxy server instead of directly connecting to the NetQ Cloud Appliance or VM; you must also specify a proxy host

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install opta standalone full interface en01 bundle /mnt/installables/NetQ-4.0.0.tgz config-key CI39fo5CZ3cucHJvZDEubmV0cS5jdW11bHVzbmVp6z8ma3MuY29tGLsD
  • netq install opta activate-job

netq install patch

Installs a focused software fix using a compressed file package (rather than a full installation or upgrade). Run this command on the NetQ appliance or VM as appropriate.

Syntax

netq install patch
    <text-tarball-name>

Required Arguments

Argument Value Description
NA <text-tarball-name> Install the software patch contained in the tarball at this location; you must specify a full path

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install patch /mnt/installables/NetQ-4.0.0-patch.tgz
  • netq upgrade

netq install standalone activate-job

Activates a NetQ instance after you install the software. Activation requires a configuration key that you can obtain from support.

Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install standalone activate-job
    config-key <text-opta-key>

Required Arguments

Argument Value Description
activate-job NA Activate NetQ instance
config-key <text-opta-key> Use this unique key to activate NetQ

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Replaced netq update opta config-key
2.4.0 Introduced

Sample Usage

cumulus@switch:~$ netq install standalone activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHVzbmV0d29ya3MuY29cB3ag
  • netq install standalone infra-job
  • netq install standalone init-job
  • netq install standalone install-job
  • netq install standalone full

netq install standalone full

Installs the NetQ Platform software on the NetQ On-premises Appliance or VM in an on-premises, single server deployment, all with a single command. You must have the hostname or IP address of the server, and the NetQ software bundle to run the command. A configuration key is optional.

Obtain the software release bundle from the My Mellanox support page.

Syntax

netq install standalone full
    (interface <text-opta-ifname>|ip-addr <text-ip-addr>)
    bundle <text-bundle-url>
    [config-key <text-opta-key>]

Required Arguments

Argument Value Description
full NA Install a server with NetQ software, running all initialization and configuration commands automatically
interface <text-opta-ifname> Install NetQ on the server with this interface as the communication interface for the NetQ Agents on the monitored switches and hosts
ip-addr <text-ip-addr> Install NetQ on the server with this IP address to communicate with the NetQ Agents on the monitored switches and hosts
bundle <text-bundle-url> Install the NetQ software bundle at this location; you must specify a full path

Options

Option Value Description
conifg-key <text-opta-key> Use this unique key to activate the software

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.1 Added ip-addr argument
2.4.0 Added standalone and full arguments. Removed download, file, and force options.
2.2.2 Added download options
Before 2.2.1 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-4.0.0.tgz
  • netq install standalone activate-job
  • netq install standalone infra-job
  • netq install standalone init-job
  • netq install standalone install-job

netq install standalone infra-job

After initialization, this command installs kafka and operators to aid in installation of software.

Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install standalone infra-job

Required Arguments

Argument Value Description
infra-job NA Install helper aids for software installation

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install standalone infra-job
  • netq install standalone activate-job
  • netq install standalone init-job
  • netq install standalone install-job
  • netq install standalone full

netq install standalone init-job

Verifies NetQ On-premises Appliance or VM resources, extracts NetQ packages, configures Kubernetes, node services and Docker registry, and install the Cassandra database in preparation for NetQ installation and activation in a single server, on-premises deployment.

Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install standalone init-job

Required Arguments

Argument Value Description
init-job NA Run the initialization jobs

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install standalone init-job
  • netq install standalone activate-job
  • netq install standalone infra-job
  • netq install standalone install-job
  • netq install standalone full

netq install standalone install-job

After you prepare and configure all the infrastructure, this command installs the NetQ Platform software on the NetQ On-premises Appliance or VM using the NetQ installation file that you previously downloaded and stored.

Obtain the software release bundle from the My Mellanox support page.

Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.

Syntax

netq install standalone install-job
    bundle <text-bundle-url>

Required Arguments

Argument Value Description
install-job NA Install the NetQ software
bundle <text-bundle-url> Install the NetQ-x.y.z.tgz installation file at this location; you must specify the full path

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
2.4.0 Introduced

Sample Usage

cumulus@<hostname>:~$ netq install standalone install-job bundle /mnt/installables/NetQ-4.0.0.tgz
  • netq install standalone activate-job
  • netq install standalone infra-job
  • netq install standalone init-job
  • netq install standalone full

netq install update-settings

Overrides system variables after encountering issues during installation. File a support ticket with the NVIDIA Enterprise Support team before using this command. They can provide the key/value pair needed to resolve your issue.

Syntax

netq install update-settings
    <text-key>
    <text-value>

Required Arguments

Argument Value Description
NA <text-key> Update the environment variable with this name
NA <text-value> Update the specified environment variable with this value

Options

None

Command History

A release appears here if there were changes to the command; otherwise it is not listed.

Release Description
3.1.0 Introduced

Sample Usage

Change timeout for tasks

cumulus@<hostname>:~$ netq install update-settings DEFAULT_TASK_TIMEOUT_IN_MILLIS 3000000

None