I through K Commands
This topic includes all commands that begin with netq i*, netq j*, and netq k*.
About Installation Commands
NetQ installation can be performed with a single command or you can perform the individual steps using multiple commands. Generally, using the single command option is strongly recommended. However, the individual commands can be useful for troubleshooting the installation process when it fails. You may need to create a support ticket to take full advantage of the individual commands.
These commands can only be used once the physical server or VM has been bootstrapped. Refer to netq bootstrap.
On-premises single server
On-premises server cluster
Cloud/remote
netq install cluster activate-job
Activates a NetQ instance after an initial server cluster (master and two worker nodes) is configured and installed. Activation requires a configuration key that can be obtained from support.
Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install cluster activate-job
config-key <text-opta-key>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| activate-job | NA | Activate NetQ instance |
| config-key | <text-opta-key> | Use this unique key to activate NetQ |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@switch:~$ netq install cluster activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHVzbmV0d29ya3MuY29cB3ag
Related Commands
- netq install cluster infra-job
- netq install cluster init-job
- netq install cluster install-job
- netq install cluster join-workers
- netq install cluster full
netq install cluster full
Installs the NetQ Platform software on the servers (NetQ On-premises Appliances or VMs) in an on-premises, server cluster deployment, all with a single command. You must have the hostname or IP address of the master node and two worker nodes, and the NetQ software bundle to run the command.
Obtain the software release bundle from the My Mellanox support page.
Syntax
netq install cluster full
(interface <text-opta-ifname>|ip-addr <text-ip-addr>)
bundle <text-bundle-url>
[config-key <text-opta-key>]
workers <text-worker-01> <text-worker-02>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| full | NA | Install a server cluster, running all initialization and configuration commands automatically |
| interface | <text-opta-ifname> | Install a server cluster with a master node using this interface to communicate with the NetQ Agents on the worker nodes |
| ip-addr | <text-ip-addr> | Install a server cluster with a master node with this IP address to communicate with the NetQ Agents on the worker nodes |
| bundle | <text-bundle-url> | Install the NetQ software bundle at this location; a full path is required |
| workers | <text-worker-01> <text-worker-02> | Install the worker nodes with these IP addresses |
Options
| Option | Value | Description |
|---|---|---|
| conifg-key | <text-opta-key> | Use this unique key to install the server cluster |
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Added ip-addr argument |
| 2.4.0 | Added cluster and full arguments. Removed download, file, and force options. |
| 2.2.2 | Added download options |
| Before 2.2.1 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install cluster full interface eth0 bundle /mnt/installables/NetQ-3.3.1.tgz workers 10.20.10.25 10.20.10.45
Related Commands
- netq install cluster activate-job
- netq install cluster infra-job
- netq install cluster init-job
- netq install cluster install-job
- netq install cluster join-workers
netq install cluster init-job
Verifies master node (NetQ On-premises Appliance or VM) resources, extracts NetQ packages, configures Kubernetes, node services and Docker registry, and install the Cassandra database in preparation for NetQ installation and activation in a server cluster deployment.
Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install cluster init-job
Required Arguments
| Argument | Value | Description |
|---|---|---|
| init-job | NA | Run the initialization jobs |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install cluster init-job
Related Commands
- netq install cluster activate-job
- netq install cluster infra-job
- netq install cluster install-job
- netq install cluster join-workers
- netq install cluster full
netq install cluster join-workers
After initiating a NetQ installation, this command configures the first two worker nodes (NetQ On-premises Appliances or VMs) in a server cluster deployment.
Alternately, use netq install cluster full to perform this and all other steps of a NetQ installation with a single command.
Refer to Post Installation Configuration Options to add additional worker nodes after NetQ has been completely installed.
Syntax
netq install cluster join-workers
<text-worker-01>
[<text-worker-02>]
Required Arguments
| Argument | Value | Description |
|---|---|---|
| join-workers | NA | Identify at least one worker node for the server cluster |
| NA | <text-worker-node-01> | IP address of server to be configured as the first worker node in this server cluster |
Options
| Option | Value | Description |
|---|---|---|
| NA | <text-worker-node-02> | IP address of server to be configured as the second worker node in this server cluster |
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install cluster join-workers 192.168.10.23 192.168.10.25
Related Commands
- netq install cluster activate-job
- netq install cluster infra-job
- netq install cluster init-job
- netq install cluster install-job
- netq install cluster full
netq install cluster infra-job
After initialization and worker nodes have been configured, this command installs the Kafka service and operators to aid in installation of the NetQ software.
Alternately, use netq install cluster full (on-premises) or netq install opta cluster (remote/cloud) to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install cluster infra-job
Required Arguments
| Argument | Value | Description |
|---|---|---|
| infra-job | NA | Adds infrastructure aids to support installation |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install cluster infra-job
Related Commands
- netq install cluster activate-job
- netq install cluster init-job
- netq install cluster install-job
- netq install cluster join-workers
- netq install cluster full
netq install cluster install-job
After all of the infrastructure has been prepared and configured, this command installs the NetQ software using the NetQ installation file that you have previously downloaded and stored.
Obtain the software release bundle from the My Mellanox support page.
Alternately, use netq install cluster full (on-premises) or netq install opta cluster (remote/cloud) to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install cluster install-job
bundle <text-bundle-url>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| install-job | NA | Install the NetQ software |
| bundle | <text-bundle-url> | Install the NetQ-x.y.z.tgz installation file at this location; the full path is required |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install cluster install-job bundle /mnt/installables/NetQ-3.3.0.tgz
Related Commands
- netq install cluster activate-job
- netq install cluster infra-job
- netq install cluster init-job
- netq install cluster join-workers
- netq install cluster full
netq install opta activate-job
Activates the NetQ Collector software after an initial server or server cluster (master and two worker nodes) is configured and installed. Activation requires a configuration key that can be obtained from an email titled A new site has been added to your Cumulus NetQ account (sent to your NetQ administrator).
Syntax
netq install opta activate-job
config-key <text-opta-key>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| activate-job | NA | Activate NetQ collector software |
| config-key | <text-opta-key> | Use this unique key to activate NetQ |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Introduced |
Sample Usage
cumulus@switch:~$ netq install opta activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHV9f3lk0d29ya3MuY29cB3ag
Related Commands
- netq install opta cluster
- netq install opta standalone
netq install opta cluster
Installs the NetQ Collector software on a master node and two worker nodes. For cloud deployments, it installs the software on the NetQ Cloud Appliance or VM. For a multi-site on-premises deployment, it installs the software on one or two secondary servers at the external premises. You must have the hostname, IP address, or interface of the servers, the NetQ software bundle, and configuration key to run the command. A proxy can also be configured.
Obtain the software release bundle from the My Mellanox support page.
Obtain the config-key as follows:
- Cloud: Locate and retrieve key from email titled A new site has been added to your Cumulus NetQ account (sent to your NetQ administrator)
- Remote: Follow the instructions in Configure Multiple Premises
Syntax
netq install opta cluster full
(interface <text-opta-ifname>|ip-addr <text-ip-addr>)
bundle<text-bundle-url>
config-key <text-opta-key>
workers <text-worker-01> <text-worker-02>
[proxy-host <text-proxy-host> proxy-port <text-proxy-port>]
Required Arguments
| Argument | Value | Description |
|---|---|---|
| full | NA | Install a server with NetQ Collector software, running all initialization and configuration commands automatically |
| interface | <text-opta-ifname> | Install a server cluster with a master node using this interface to communicate with the NetQ Agents on the worker nodes |
| ip-addr | <text-ip-addr> | Install a server cluster with a master node with this IP address to communicate with the NetQ Agents on the worker nodes |
| bundle | <text-bundle-url> | Install the NetQ software bundle at this location; a full path is required |
| workers | <text-worker-01> <text-worker-02> | Install the worker nodes with these IP addresses |
| conifg-key | <text-opta-key> | Use this unique key to activate the software |
Options
| Option | Value | Description |
|---|---|---|
| proxy-host | <text-proxy-host> | Use the proxy server with this hostname or IP address instead of directly connecting to the NetQ Cloud Appliance or VM; a port must also be specified |
| proxy-port | <text-proxy-port> | Use this port on the proxy server instead of directly connecting to the NetQ Cloud Appliance or VM; a proxy host must also be specified |
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Added ip-addr argument, proxy-host and proxy-port options |
| 2.4.0 | Added cluster and full arguments. Removed download, file, and force options. |
| 2.2.2 | Added download options |
| Before 2.2.1 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install opta cluster full interface en01 bundle /mnt/installables/NetQ-3.3.1.tgz config-key CI39fo5CZ3cucHJvZDEubmV0cS5jdW11bHVzbmVp6z8ma3MuY29tGLsD workers 10.20.10.25 10.20.10.45
Related Commands
- netq install opta activate-job
netq install opta standalone
Installs the NetQ Collector software on a single cloud server (NetQ Cloud Appliance or VM) with a single command. You must have the hostname, IP address, or interface of the server, the NetQ software bundle, and configuration key to run the command. A proxy can also be configured.
Obtain the software release bundle from the My Mellanox support page.
Obtain the config-key from the email sent to your NetQ administrator titled A new site has been added to your Cumulus NetQ account.
Syntax
netq install opta standalone full
(interface <text-opta-ifname>|ip-addr <text-ip-addr>)
bundle <text-bundle-url>
config-key <text-opta-key>
[proxy-host <text-proxy-host> proxy-port<text-proxy-port>]
Required Arguments
| Argument | Value | Description |
|---|---|---|
| full | NA | Install a server with NetQ Collector software, running all initialization and configuration commands automatically |
| interface | <text-opta-ifname> | Install NetQ on the server with this interface as the communication interface for the NetQ Agents on the monitored switches and hosts |
| ip-addr | <text-ip-addr> | Install NetQ on the server with this IP address to communicate with the NetQ Agents on the monitored switches and hosts |
| bundle | <text-bundle-url> | Install the NetQ software bundle at this location; a full path is required |
| conifg-key | <text-opta-key> | Use this unique key to activate the software |
Options
| Option | Value | Description |
|---|---|---|
| proxy-host | <text-proxy-host> | Use the proxy server with this hostname or IP address instead of directly connecting to the NetQ Cloud Appliance or VM; a port must also be specified |
| proxy-port | <text-proxy-port> | Use this port on the proxy server instead of directly connecting to the NetQ Cloud Appliance or VM; a proxy host must also be specified |
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install opta standalone full interface en01 bundle /mnt/installables/NetQ-3.3.1.tgz config-key CI39fo5CZ3cucHJvZDEubmV0cS5jdW11bHVzbmVp6z8ma3MuY29tGLsD
Related Commands
- netq install opta activate-job
netq install patch
Installs a focused software fix using a compressed file package (rather than a full installation or upgrade). Run this command on the NetQ appliance or VM as appropriate.
Syntax
netq install patch
<text-tarball-name>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| NA | <text-tarball-name> | Install the software patch contained in the tarball at this location; full path is required |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install patch /mnt/installables/NetQ-3.3.1-patch.tgz
Related Commands
- netq upgrade
netq install standalone activate-job
Activates a NetQ instance after the software has been installed. Activation requires a configuration key that can be obtained from support.
Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install standalone activate-job
config-key <text-opta-key>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| activate-job | NA | Activate NetQ instance |
| config-key | <text-opta-key> | Use this unique key to activate NetQ |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Replaced netq update opta config-key |
| 2.4.0 | Introduced |
Sample Usage
cumulus@switch:~$ netq install standalone activate-job config-key ju8Kl4IhZ3cucHJvZDEubmV0cPk3vW11bHVzbmV0d29ya3MuY29cB3ag
Related Commands
- netq install standalone infra-job
- netq install standalone init-job
- netq install standalone install-job
- netq install standalone full
netq install standalone full
Installs the NetQ Platform software on the NetQ On-premises Appliance or VM in an on-premises, single server deployment, all with a single command. You must have the hostname or IP address of the server, and the NetQ software bundle to run the command. A configuration key is optional.
Obtain the software release bundle from the My Mellanox support page.
Syntax
netq install standalone full
(interface <text-opta-ifname>|ip-addr <text-ip-addr>)
bundle <text-bundle-url>
[config-key <text-opta-key>]
Required Arguments
| Argument | Value | Description |
|---|---|---|
| full | NA | Install a server with NetQ software, running all initialization and configuration commands automatically |
| interface | <text-opta-ifname> | Install NetQ on the server with this interface as the communication interface for the NetQ Agents on the monitored switches and hosts |
| ip-addr | <text-ip-addr> | Install NetQ on the server with this IP address to communicate with the NetQ Agents on the monitored switches and hosts |
| bundle | <text-bundle-url> | Install the NetQ software bundle at this location; a full path is required |
Options
| Option | Value | Description |
|---|---|---|
| conifg-key | <text-opta-key> | Use this unique key to activate the software |
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.1 | Added ip-addr argument |
| 2.4.0 | Added standalone and full arguments. Removed download, file, and force options. |
| 2.2.2 | Added download options |
| Before 2.2.1 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-3.3.1.tgz
Related Commands
- netq install standalone activate-job
- netq install standalone infra-job
- netq install standalone init-job
- netq install standalone install-job
netq install standalone infra-job
After initialization, this command installs kafka and operators to aid in installation of software.
Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install standalone infra-job
Required Arguments
| Argument | Value | Description |
|---|---|---|
| infra-job | NA | Install helper aids for software installation |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install standalone infra-job
Related Commands
- netq install standalone activate-job
- netq install standalone init-job
- netq install standalone install-job
- netq install standalone full
netq install standalone init-job
Verifies NetQ On-premises Appliance or VM resources, extracts NetQ packages, configures Kubernetes, node services and Docker registry, and install the Cassandra database in preparation for NetQ installation and activation in a single server, on-premises deployment.
Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install standalone init-job
Required Arguments
| Argument | Value | Description |
|---|---|---|
| init-job | NA | Run the initialization jobs |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install standalone init-job
Related Commands
- netq install standalone activate-job
- netq install standalone infra-job
- netq install standalone install-job
- netq install standalone full
netq install standalone install-job
After all of the infrastructure has been prepared and configured, this command installs the NetQ Platform software on the NetQ On-premises Appliance or VM using the NetQ installation file that you have previously downloaded and stored.
Obtain the software release bundle from the My Mellanox support page.
Alternately, use netq install standalone full to perform this and all other steps of a NetQ installation with a single command.
Syntax
netq install standalone install-job
bundle <text-bundle-url>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| install-job | NA | Install the NetQ software |
| bundle | <text-bundle-url> | Install the NetQ-x.y.z.tgz installation file at this location; the full path is required |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 2.4.0 | Introduced |
Sample Usage
cumulus@<hostname>:~$ netq install standalone install-job bundle /mnt/installables/NetQ-3.3.0.tgz
Related Commands
- netq install standalone activate-job
- netq install standalone infra-job
- netq install standalone init-job
- netq install standalone full
netq install update-settings
Overrides system variables after encountering issues during installation. File a support ticket with the NVIDIA Cumulus Networks Global Support Services team before using this command. They can provide the key/value pair needed to resolve your issue.
Syntax
netq install update-settings
<text-key>
<text-value>
Required Arguments
| Argument | Value | Description |
|---|---|---|
| NA | <text-key> | Update the environment variable with this name |
| NA | <text-value> | Update the specified environment variable with this value |
Options
None
Command History
A release is included if there were changes to the command, otherwise it is not listed.
| Release | Description |
|---|---|
| 3.1.0 | Introduced |
Sample Usage
Change timeout for tasks
cumulus@<hostname>:~$ netq install update-settings DEFAULT_TASK_TIMEOUT_IN_MILLIS 3000000
Related Commands
None