Integrate NetQ with Your LDAP Server

With this release and an administrator role, you are able to integrate the NetQ role-based access control (RBAC) with your lightweight directory access protocol (LDAP) server in on-premises deployments. NetQ maintains control over role-based permissions for the NetQ application. Currently there are two roles, admin and user. With the integration, user authentication is handled through LDAP and your directory service, such as Microsoft Active Directory, Kerberos, OpenLDAP, and Red Hat Directory Service. A copy of each user from LDAP is stored in the local NetQ database.

Integrating with an LDAP server does not prevent you from configuring local users (stored and managed in the NetQ database) as well.

Read Get Started to become familiar with LDAP configuration parameters, or skip to Create an LDAP Configuration if you are already an LDAP expert.

Get Started

LDAP integration requires information about how to connect to your LDAP server, the type of authentication you plan to use, bind credentials, and, optionally, search attributes.

Provide Your LDAP Server Information

To connect to your LDAP server, you need the URI and bind credentials. The URI identifies the location of the LDAP server. It is comprised of a FQDN (fully qualified domain name) or IP address, and the port of the LDAP server where the LDAP client can connect. For example: myldap.mycompany.com or 192.168.10.2. Typically port 389 is used for connection over TCP or UDP. In production environments, a secure connection with SSL can be deployed. In this case, the port used is typically 636. Setting the Enable SSL toggle automatically sets the server port to 636.

Specify Your Authentication Method

Two methods of user authentication are available: anonymous and basic.

• Anonymous: LDAP client does not require any authentication. The user can access all resources anonymously. This is not commonly used for production environments.

• Basic: (Also called Simple) LDAP client must provide a bind DN and password to authenticate the connection. When selected, the Admin credentials appear: Bind DN and Bind Password. The distinguished name (DN) is defined using a string of variables. Some common variables include:

  Syntax	Description or Usage
  cn	common name
  ou	organizational unit or group
  dc	domain name
  dc	domain extension

  • Bind DN: DN of user with administrator access to query the LDAP server; used for binding with the server. For example, uid =admin,ou=ntwkops,dc=mycompany,dc=com.
  • Bind Password: Password associated with Bind DN.

  The Bind DN and password are sent as clear text. Only users with these credentials are allowed to perform LDAP operations.

If you are unfamiliar with the configuration of your LDAP server, contact your administrator to ensure you select the appropriate authentication method and credentials.

Define User Attributes

Two attributes are required to define a user entry in a directory:

• Base DN: Location in directory structure where search begins. For example, dc=mycompany,dc=com
• User ID: Type of identifier used to specify an LDAP user. This can vary depending on the authentication service you are using. For example, user ID (UID) or email address can be used with OpenLDAP, whereas sAMAccountName might be used with Active Directory.

Optionally, you can specify the first name, last name, and email address of the user.

Set Search Attributes

While optional, specifying search scope indicates where to start and how deep a given user can search within the directory. The data to search for is specified in the search query.

Search scope options include:

• Subtree: Search for users from base, subordinates at any depth (default)
• Base: Search for users at the base level only; no subordinates
• One Level: Search for immediate children of user; not at base or for any descendants
• Subordinate: Search for subordinates at any depth of user; but not at base

A typical search query for users would be {userIdAttribute}={userId}.

Now that you are familiar with the various LDAP configuration parameters, you can configure the integration of your LDAP server with NetQ using the instructions in the next section.

Create an LDAP Configuration

One LDAP server can be configured per bind DN (distinguished name). Once LDAP is configured, you can validate the connectivity (and configuration) and save the configuration.

To create an LDAP configuration:

1. Click , then select Management under Admin.

2. Locate the LDAP Server Info card, and click Configure LDAP.

   

3. Fill out the LDAP Server Configuration form according to your particular configuration. Refer to Overview for details about the various parameters.

   Note: Items with an asterisk (*) are required. All others are optional.

4. Click Save to complete the configuration, or click Cancel to discard the configuration.

Example LDAP Configurations

A variety of example configurations are provided here. Scenarios 1-3 are based on using an OpenLDAP or similar authentication service. Scenario 4 is based on using the Active Directory service for authentication.

Scenario 1: Base Configuration

In this scenario, we are configuring the LDAP server with anonymous authentication, a User ID based on an email address, and a search scope of base.

Scenario 2: Basic Authentication and Subset of Users

In this scenario, we are configuring the LDAP server with basic authentication, for access only by the persons in the network operators group, and a limited search scope.

Scenario 3: Scenario 2 with Widest Search Capability

In this scenario, we are configuring the LDAP server with basic authentication, for access only by the persons in the network administrators group, and an unlimited search scope.

Scenario 4: Scenario 3 with Active Directory Service

In this scenario, we are configuring the LDAP server with basic authentication, for access only by the persons in the given Active Directory group, and an unlimited search scope.

Add LDAP Users to NetQ

1. Click , then select Management under Admin.

2. Locate the User Accounts card, and click Manage.

3. On the User Accounts tab, click Add User.

   

4. Select LDAP User.

5. Enter the user’s ID.

6. Enter your administrator password.

7. Click Search.

8. If the user is found, the email address, first and last name fields are automatically filled in on the Add New User form. If searching is not enabled on the LDAP server, you must enter the information manually.

   

   If the fields are not automatically filled in, and searching is enabled on the LDAP server, you might require changes to the mapping file.

9. Select the NetQ user role for this user, admin or user, in the User Type dropdown.

10. Enter your admin password, and click Save, or click Cancel to discard the user account.

    

    LDAP user passwords are not stored in the NetQ database and are always authenticated against LDAP.

11. Repeat these steps to add additional LDAP users.

Remove LDAP Users from NetQ

You can remove LDAP users in the same manner as local users.

1. Click , then select Management under Admin.

2. Locate the User Accounts card, and click Manage.

3. Select the user or users you want to remove.

4. Click in the Edit menu.