layout-3 layout-6 layout-1 layout-top
NVIDIA Docs Hubchevron_right NVIDIA Networkingchevron_right Networking Softwarechevron_right Management Softwarechevron_right

NVIDIA NetQ

layout-top layout-6 layout-1

If you are using the current version of Cumulus NetQ, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

Install and Configure the NetQ CLI on Ubuntu Servers

After installing your Cumulus NetQ software, you should install the NetQ 3.0.0 Agents on each switch you want to monitor. NetQ Agents can be installed on servers running:

  • Ubuntu 16.04
  • Ubuntu 18.04 (NetQ 2.2.2 and later)

Prepare for NetQ CLI Installation on an Ubuntu Server

For servers running Ubuntu OS, you need to:

  • Verify the minimum service packages versions are installed
  • Verify the server is running lldpd
  • Install and configure network time server, if needed
  • Obtain NetQ software packages

If your network uses a proxy server for external connections, you should first configure a global proxy so apt-get can access the software package in the Cumulus Networks repository.

Verify Service Package Versions

Before you install the NetQ Agent on an Ubuntu server, make sure the following packages are installed and running these minimum versions:

  • iproute 1:4.3.0-1ubuntu3.16.04.1 all
  • iproute2 4.3.0-1ubuntu3 amd64
  • lldpd 0.7.19-1 amd64
  • ntp 1:4.2.8p4+dfsg-3ubuntu5.6 amd64

Verify the Server is Running lldpd

Make sure you are running lldpd, not lldpad. Ubuntu does not include lldpd by default, which is required for the installation.

To install this package, run the following commands:

root@ubuntu:~# sudo apt-get update
root@ubuntu:~# sudo apt-get install lldpd
root@ubuntu:~# sudo systemctl enable lldpd.service
root@ubuntu:~# sudo systemctl start lldpd.service

Install and Configure Network Time Server

If NTP is not already installed and configured, follow these steps:

  1. Install NTP on the server, if not already installed. Servers must be in time synchronization with the NetQ Platform or NetQ Appliance to enable useful statistical analysis.

    root@ubuntu:~# sudo apt-get install ntp

  2. Configure the network time server.

    1. Open the /etc/ntp.conf file in your text editor of choice.

    2. Under the Server section, specify the NTP server IP address or hostname.

    3. Enable and start the NTP service.

      root@ubuntu:~# sudo systemctl enable ntp
root@ubuntu:~# sudo systemctl start ntp

    If you are running NTP in your out-of-band management network with VRF, specify the VRF (ntp@<vrf-name> versus just ntp) in the above commands.

    1. Verify NTP is operating correctly. Look for an asterisk (*) or a plus sign (+) that indicates the clock is synchronized.

      root@ubuntu:~# ntpq -pn
remote           refid            st t when poll reach   delay   offset  jitter
==============================================================================
+173.255.206.154 132.163.96.3     2 u   86  128  377   41.354    2.834   0.602
+12.167.151.2    198.148.79.209   3 u  103  128  377   13.395   -4.025   0.198
2a00:7600::41    .STEP.          16 u    - 1024    0    0.000    0.000   0.000
\*129.250.35.250 249.224.99.213   2 u  101  128  377   14.588   -0.299   0.243

    1. Install chrony if needed.

      root@ubuntu:~# sudo apt install chrony

    2. Start the chrony service.

      root@ubuntu:~# sudo /usr/local/sbin/chronyd

    3. Verify it installed successfully.

      root@ubuntu:~# chronyc activity
200 OK
8 sources online
0 sources offline
0 sources doing burst (return to online)
0 sources doing burst (return to offline)
0 sources with unknown address

    4. View the time servers chrony is using.

      root@ubuntu:~# chronyc sources
210 Number of sources = 8

MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^+ golem.canonical.com           2   6   377    39  -1135us[-1135us] +/-   98ms
^* clock.xmission.com            2   6   377    41  -4641ns[ +144us] +/-   41ms
^+ ntp.ubuntu.net              2   7   377   106   -746us[ -573us] +/-   41ms
...

      Open the chrony.conf configuration file (by default at /etc/chrony/) and edit if needed.

      Example with individual servers specified:

      server golem.canonical.com iburst
server clock.xmission.com iburst
server ntp.ubuntu.com iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync

      Example when using a pool of servers:

      pool pool.ntp.org iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync

    5. View the server chrony is currently tracking.

      root@ubuntu:~# chronyc tracking
Reference ID    : 5BBD59C7 (golem.canonical.com)
Stratum         : 3
Ref time (UTC)  : Mon Feb 10 14:35:18 2020
System time     : 0.0000046340 seconds slow of NTP time
Last offset     : -0.000123459 seconds
RMS offset      : 0.007654410 seconds
Frequency       : 8.342 ppm slow
Residual freq   : -0.000 ppm
Skew            : 26.846 ppm
Root delay      : 0.031207654 seconds
Root dispersion : 0.001234590 seconds
Update interval : 115.2 seconds
Leap status     : Normal

Obtain NetQ CLI Software Package

To install the NetQ Agent you need to install netq-apps on each server. This is available from the Cumulus Networks repository.

To obtain the NetQ CLI package:

  1. Reference and update the local apt repository.

    root@ubuntu:~# sudo wget -O- https://apps3.cumulusnetworks.com/setup/cumulus-apps-deb.pubkey | apt-key add -

  2. Add the Ubuntu repository:

    Create the file /etc/apt/sources.list.d/cumulus-host-ubuntu-xenial.list and add the following line:

    root@ubuntu:~# vi /etc/apt/sources.list.d/cumulus-apps-deb-xenial.list
...
deb [arch=amd64] https://apps3.cumulusnetworks.com/repos/deb xenial netq-latest
...

    Create the file /etc/apt/sources.list.d/cumulus-host-ubuntu-bionic.list and add the following line:

    root@ubuntu:~# vi /etc/apt/sources.list.d/cumulus-apps-deb-bionic.list
...
deb [arch=amd64] https://apps3.cumulusnetworks.com/repos/deb bionic netq-latest
...

    The use of netq-latest in these examples means that a get to the repository always retrieves the latest version of NetQ, even in the case where a major version update has been made. If you want to keep the repository on a specific version - such as netq-2.4 - use that instead.

Install NetQ CLI on an Ubuntu Server

A simple process installs the NetQ CLI on an Ubuntu server.

  1. Install the CLI software on the server.

    root@ubuntu:~# sudo apt-get update
root@ubuntu:~# sudo apt-get install netq-apps

  2. Verify you have the correct version of the CLI.

    root@ubuntu:~# dpkg-query -W -f '${Package}\t${Version}\n' netq-apps
    You should see version 3.0.0 and update 27 or later in the results. For example:
    • netq-apps_3.0.0-ub18.04u27~1588242914.9fb5b87_amd64.deb
    • netq-apps_3.0.0-ub16.04u27~1588242914.9fb5b87_amd64.deb

  3. Continue with NetQ CLI configuration in the next section.

Configure the NetQ CLI on an Ubuntu Server

Two methods are available for configuring the NetQ CLI on a switch:

  • Run NetQ CLI commands on the switch; refer to the next section
  • Edit the configuration file on the switch; refer to Configure CLI Using File

Configure NetQ CLI Using the CLI

The steps to configure the CLI are different depending on whether the NetQ software has been installed for an on-premises or cloud deployment. Follow the instruction for your deployment type.

Use the following command to configure the CLI:

netq config add cli server <text-gateway-dest> [vrf <text-vrf-name>] [port <text-gateway-port>]

Restart the CLI afterward to activate the configuration.

This example uses an IP address of 192.168.1.0 and the default port and VRF.

root@ubuntu:~# sudo netq config add cli server 192.168.1.0
root@ubuntu:~# sudo netq config restart cli

If you have a server cluster deployed, use the IP address of the master server.

To access and configure the CLI on your NetQ Platform or NetQ Cloud Appliance, you must have your username and password to access the NetQ UI to generate AuthKeys. These keys provide authorized access (access key) and user authentication (secret key). Your credentials and NetQ Cloud addresses were provided by Cumulus Networks via an email titled Welcome to Cumulus NetQ!

To generate AuthKeys:

  1. In your Internet browser, enter netq.cumulusnetworks.com into the address field to open the NetQ UI login page.

  2. Enter your username and password.

  3. From the Main Menu, select Management in the Admin column.

  1. Click Manage on the User Accounts card.

  2. Select your user and click above the table.

  3. Copy these keys to a safe place.

The secret key is only shown once. If you do not copy these, you will need to regenerate them and reconfigure CLI access.

You can also save these keys to a YAML file for easy reference, and to avoid having to type or copy the key values. You can:

  • store the file wherever you like, for example in /home/cumulus/ or /etc/netq
  • name the file whatever you like, for example credentials.yml, creds.yml, or keys.yml

BUT, the file must have the following format:

access-key: <user-access-key-value-here>
secret-key: <user-secret-key-value-here>

  1. Now that you have your AuthKeys, use the following command to configure the CLI:

    netq config add cli server <text-gateway-dest> [access-key <text-access-key> secret-key <text-secret-key> premises <text-premises-name> | cli-keys-file <text-key-file> premises <text-premises-name>] [vrf <text-vrf-name>] [port <text-gateway-port>]

  2. Restart the CLI afterward to activate the configuration.

    This example uses the individual access key, a premises of datacenterwest, and the default Cloud address, port and VRF. Be sure to replace the key values with your generated keys if you are using this example on your server.

    root@ubuntu:~# sudo netq config add cli server api.netq.cumulusnetworks.com access-key 123452d9bc2850a1726f55534279dd3c8b3ec55e8b25144d4739dfddabe8149e secret-key /vAGywae2E4xVZg8F+HtS6h6yHliZbBP6HXU3J98765= premises datacenterwest
Successfully logged into NetQ cloud at api.netq.cumulusnetworks.com:443
Updated cli server api.netq.cumulusnetworks.com vrf default port 443. Please restart netqd (netq config restart cli)

root@ubuntu:~# sudo netq config restart cli
Restarting NetQ CLI... Success!

    This example uses an optional keys file. Be sure to replace the keys filename and path with the full path and name of your keys file, and the datacenterwest premises name with your premises name if you are using this example on your server.

    root@ubuntu:~# sudo netq config add cli server api.netq.cumulusnetworks.com cli-keys-file /home/netq/nq-cld-creds.yml premises datacenterwest
Successfully logged into NetQ cloud at api.netq.cumulusnetworks.com:443
Updated cli server api.netq.cumulusnetworks.com vrf default port 443. Please restart netqd (netq config restart cli)

root@ubuntu:~# sudo netq config restart cli
Restarting NetQ CLI... Success!

Rerun this command if you have multiple premises and want to query a different premises.

Configure NetQ CLI Using Configuration File

You can configure the NetQ CLI in the netq.yml configuration file contained in the /etc/netq/ directory.

  1. Open the netq.yml file using your text editor of choice. For example:

    root@ubuntu:~# sudo nano /etc/netq/netq.yml

  2. Locate the netq-cli section, or add it.

  3. Set the parameters for the CLI.

    Specify the following parameters:

    • netq-user: User who can access the CLI
    • server: IP address of the NetQ server or NetQ Appliance
    • port (default): 32708

    Your YAML configuration file should be similar to this: 
    netq-cli:
netq-user: admin@company.com
port: 32708
server: 192.168.0.254

    Specify the following parameters:

    • netq-user: User who can access the CLI
    • server: api.netq.cumulusnetworks.com
    • port (default): 443
    • premises: Name of premises you want to query

    Your YAML configuration file should be similar to this: 
    netq-cli:
netq-user: admin@company.com
port: 443
premises: datacenterwest
server: api.netq.cumulusnetworks.com

    Copyright © 2024  NVIDIA Corporation