Install NetQ Using the CLI

You can now install the NetQ software using the NetQ CLI.

To install NetQ:

1. Log in to your NetQ platform server, NetQ Appliance, NetQ Cloud Appliance or the master node of your cluster.

2. Install the software.

   On-premises, Single Server

   Run the following command on your NetQ platform server or NetQ Appliance:

   cumulus@hostname:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-2.4.1.tgz
   

   You can specify the IP address instead of the interface name here: use ip-addr <IP address> in place of interface <ifname> above.

   Run the netq show opta-health command to verify all applications are operating properly. Please allow 10-15 minutes for all applications to come up and report their status.

   cumulus@hostname:~$ netq show opta-health
   Application                                            Status    Namespace      Restarts    Timestamp
   -----------------------------------------------------  --------  -------------  ----------  ------------------------
   cassandra-rc-0-w7h4z                                   READY     default        0           Fri Apr 10 16:08:38 2020
   cp-schema-registry-deploy-6bf5cbc8cc-vwcsx             READY     default        0           Fri Apr 10 16:08:38 2020
   kafka-broker-rc-0-p9r2l                                READY     default        0           Fri Apr 10 16:08:38 2020
   kafka-connect-deploy-7799bcb7b4-xdm5l                  READY     default        0           Fri Apr 10 16:08:38 2020
   netq-api-gateway-deploy-55996ff7c8-w4hrs               READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-address-deploy-66776ccc67-phpqk               READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-admin-oob-mgmt-server                         READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-bgp-deploy-7dd4c9d45b-j9bfr                   READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-clagsession-deploy-69564895b4-qhcpr           READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-configdiff-deploy-ff54c4cc4-7rz66             READY     default        0           Fri Apr 10 16:08:38 2020
   ...
   

   If any of the applications or services display Status as DOWN after 30 minutes, open a support ticket and attach the output of the opta-support command.

   On-premises, Server Cluster

   Run the following commands on your master node, using the IP addresses of your worker nodes:

   cumulus@<hostname>:~$ netq install cluster full interface eth0 bundle /mnt/installables/NetQ-2.4.1.tgz workers <worker-1-ip> <worker-2-ip>
   

   You can specify the IP address instead of the interface name here: use ip-addr <IP address> in place of interface eth0 above.

   Run the netq show opta-health command to verify all applications are operating properly. Please allow 10-15 minutes for all applications to come up and report their status.

   cumulus@hostname:~$ netq show opta-health
   Application                                            Status    Namespace      Restarts    Timestamp
   -----------------------------------------------------  --------  -------------  ----------  ------------------------
   cassandra-rc-0-w7h4z                                   READY     default        0           Fri Apr 10 16:08:38 2020
   cp-schema-registry-deploy-6bf5cbc8cc-vwcsx             READY     default        0           Fri Apr 10 16:08:38 2020
   kafka-broker-rc-0-p9r2l                                READY     default        0           Fri Apr 10 16:08:38 2020
   kafka-connect-deploy-7799bcb7b4-xdm5l                  READY     default        0           Fri Apr 10 16:08:38 2020
   netq-api-gateway-deploy-55996ff7c8-w4hrs               READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-address-deploy-66776ccc67-phpqk               READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-admin-oob-mgmt-server                         READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-bgp-deploy-7dd4c9d45b-j9bfr                   READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-clagsession-deploy-69564895b4-qhcpr           READY     default        0           Fri Apr 10 16:08:38 2020
   netq-app-configdiff-deploy-ff54c4cc4-7rz66             READY     default        0           Fri Apr 10 16:08:38 2020
   ...
   

   If any of the applications or services display Status as DOWN after 30 minutes, open a support ticket and attach the output of the opta-support command.

   Cloud, Single Server

   Run the following command on your NetQ Cloud Appliance with the config-key sent by Cumulus Networks in an email titled “A new site has been added to your Cumulus NetQ account.”

   cumulus@<hostname>:~$ netq install opta standalone full interface eth0 bundle /mnt/installables/NetQ-2.4.1-opta.tgz config-key <your-config-key-from-email> proxy-host <proxy-hostname> proxy-port <proxy-port>
   

   You can specify the IP address instead of the interface name here: use ip-addr <IP address> in place of interface eth0 above.

   Run the netq show opta-health command to verify all applications are operating properly.

   cumulus@hostname:~$ netq show opta-health
   OPTA is healthy
       ```
   

   Cloud, Server Cluster

   Run the following commands on your master NetQ Cloud Appliance with the config-key sent by Cumulus Networks in an email titled “A new site has been added to your Cumulus NetQ account.”

   cumulus@<hostname>:~$ netq install opta cluster full interface eth0 bundle /mnt/installables/NetQ-2.4.1-opta.tgz config-key <your-config-key-from-email> workers <worker-1-ip> <worker-2-ip> proxy-host <proxy-hostname> proxy-port <proxy-port>
   

   You can specify the IP address instead of the interface name here: use ip-addr <IP address> in place of interface eth0 above.

   Run the netq show opta-health command to verify all applications are operating properly.

   cumulus@hostname:~$ netq show opta-health
   OPTA is healthy